My XS11 Project - Juggernaut

[MrFreeze5]

Hey, that looks familiar.

hehe yeah. I sent my machinist my old stock cover, a yamaha slave cylinder, and a link to your write up. The only problem I have with it is he made the screw holes the same size as they were on the old cover(with the tapered head screw) so the screw is too small. So I am going to have to drill it out a little and put in a bushing, or countersink it and use a tapered head screw, but I dont really want to do that.

[melbxs]

Great thread freeze. Thanks for putting so much work into the pics etc. Makes for a brilliant record of all your work.

[apg0106]

any updates by chance?!

[gumbie]

what's up with the bike? I really wand to c what it looks like =)