New Paint!

[rpgoerlich]

Dropped off the replacement tank I got from Andreas and my side covers last week to get them painted. A bit of cleanup on the tank.
They came out Great!
BTW, that is one of the golf cart chrome emblems I got for $20(for both), until I can find some of the gold tank emblems.
Here's the tank,

[jaimes-duran]

Looks very nice and original

[CatatonicBug]

Pretty spiffy! Now let's see it on the bike!

[foreda]

Indigo Blue

Is it close to the original Indigo Blue? Who painted and what did you pay if you don't mind saying? Are the pin stripes painted?

[rpgoerlich]

Color was the Toyota Blue-Black Effect Code 210
http://www.xs11.com/forum/showpost.p...03&postcount=5


A collision shop here in Katy,TX painted it. Cost was $210 for the tank & side covers, base coat/clear coat and pinstriping. He had just a bit of clean-up on the tank and straightened out the top which had a little depression(dent) in it. Pinstripes were put on after the clear coat and are vinyl?


I need both gold tank emblems and one good sidecover emblem. They seem to be 3-4 weeks out at ReproductionDecals.com. I emailed our Aussie friends at BadgeReplicas.com/au but no response yet.

As soon as I get my carbs put back on I'll be getting a pic of it Catatonic, with your windshield!

[gk45241]

paint

seems like you got a good deal. I assume the rear fender is still chrome?
Are the side covers the two tone with the striping as well? I likey!!!


Gary

[foreda]

That's cheap!

Color was the Toyota Blue-Black Effect Code 210
http://www.xs11.com/forum/showpost.p...03&postcount=5


A collision shop here in Katy,TX painted it. Cost was $210 for the tank & side covers, base coat/clear coat and pinstriping. He had just a bit of clean-up on the tank and straightened out the top which had a little depression(dent) in it. Pinstripes were put on after the clear coat and are vinyl?


I need both gold tank emblems and one good sidecover emblem. They seem to be 3-4 weeks out at ReproductionDecals.com. I emailed our Aussie friends at BadgeReplicas.com/au but no response yet.

As soon as I get my carbs put back on I'll be getting a pic of it Catatonic, with your windshield!

I know Brian at BadgeReplicas. I have been working with him for about a year now on getting the badges replicated for the 78/79 Standards. I sent him a couple of badges from the 78 model and I expect they will be done soon. That's a good deal on that paint job. My paint job on my 78 cost me 600 but it was custom and is flawless. I might have to get the name of that shop since my office is just about in Katy.

[Bigfoot]

That tank looks nice. Not too bad of a price IMHO.

[rpgoerlich]

Not quite as clean as yours Foreda, yet... But dirty as it was, I set the tank and side covers on it for a pic...didn't have my duster handy.

[foreda]

Looks good!

Not quite as clean as yours Foreda, yet... But dirty as it was, I set the tank and side covers on it for a pic...didn't have my duster handy.

Give it to me for about a week and I can make it look like mine. Is that a Special seat?

[foreda]

Special Side covers

Give it to me for about a week and I can make it look like mine. Is that a Special seat?

Looks like Special Side Covers as well??

[rpgoerlich]

It's an 80, Original seat and right side cover. The left was missing and I found a replacement. Right side cover has the slots it mounts with, the left has the holes. Original owner had it sitting in his storage for years. I think I have just over 5kmi on it now.

[foreda]

Cowling

It's an 80, Original seat and right side cover. The left was missing and I found a replacement. Right side cover has the slots it mounts with, the left has the holes. Original owner had it sitting in his storage for years. I think I have just over 5kmi on it now.

Did the 80 have the cowling in the back? I can't tell in the picture.

[rpgoerlich]

No cowling or tailpiece on the 80 standard.

[CatatonicBug]

That does look nice! A little polishing of the chrome and aluminum, and that will be one fancy ride!