Spark Plug Wire Fell Off

[digitalsam]

Finally took the bike out on the rode this afternoon. Turning back into work, it died and I could not get it restarted. After pushing it half a mile up hill, I noticed that the park plug cable had pulled out of the cap on Cylinder number 4 (far right). I assume that this was the problem. (Right?)

Question is: how do I fix it? Will I need to buy the whole unit (#16-17 & #22-23) from BikeBandits Electrical #1 schematics? or can I purchase generic new cables and caps at the local automart and attach them to the coils?

[Guy_b_g]

Try these:

http://www.ngksparkplugs.com/product...s.asp?mode=nml

Heres one place you can get them:

http://s15736.50belowcommerce.com/pr...catalogId=1351

[DiverRay]

If it was just the cap that came off, screw it back on! I would TEST them with an OHM meter to verify they are in spec. I would also cut off about 1/4" from the end of the wire to have a clean connection.