Tweet
Is there an adjustment on the front forks of a 78 standard? When I was filling my frontforks with oil I noticed that there is a flathead screw in the middle of the bolt cap and it looks like an adjustment screw that can be turned inward on the springs and adjusted . I've gone thru the manual and can't find any info on it. Looking at the parts manual doesn't give me any info on it either. Anyone have any ideas?
-
It's a 3 position spring preload adjustment screw. Turn right to increase preload, left to decrease.Guy
'78E
Quidquid latine dictum sit, altum videtur
-
Ok I found it in the posts in this section. But it only showed up in the search for this section and not 'all' sections.
Adjusting Forks
Thanks!Comment
-
There are set cams, kind of like n the rear shocks. You have to push in the adjustment screw before turning it.Skids (Sid Hansen)
Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.Comment
Comment