This site will be temporarily offline this Friday April 18th from approximately 5pm PST (UTC-7), for a few hours or less (hopefully) for upgrades. See this post in Forum Announcements for more info.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hey Racer,,,,,if you want to save some money and do not mind the Yamaha being Chrome, not gold. Go to your nearest Yamaha golf cart store and get the Yamaha emblems,,,about 4 bucks brand new. The fit is near perfect,,,I take a drill and grind out about one quarter inch to fit the tank screws. Some members heat up the emblems with hot water to heat and fit the curve of the tank, I just use super sticky double stick tape and it holds the curve. CHeck the threads under search for emblems and you can get the Yamaha number for the tank badges{ really golf cart badges} for a heck of a lot less than anywhere else. As far as the Maxim badges,,,just keep checking Ebay, also do a search and there are places that manufacture reproductions,,,,but they are not cheap. Refinishing the emblems is easy,,I have done many,,,just get some gloss black spray, gold spray and a foam brush. Spray all black, dry, then spray the gold metallic on some paper, wipe with a foam brush and lightly brush across the top of the emblems. A couple of coats of gold and they look nice. Do a search for emblem refinishing, there are some nice shots and details to follow,,,,good luck, Mike in Sun Diego
Comment