If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I think that seat was new unused . That will drive the price up for sure!!!
BDF Special
80SG Vetter bagger 1196 Wiseco big bore kit, Mega Cycle Cams, slotted cam gears, ported and flowed head, bronze intake seats, Dyno Jet kit, Dyno coils and Mikes XS air pods, Venture cam chain adjuster,Geezer's regulator, Clutch mod, Mac 4 into 1 with custom built and tuned baffle, Oil cooler,MikesXS emulators mod.
Dyno tuned to 98 hp at the rear wheel.
You're not missing anything. That's a CRAZY price.
Tim Ripley - Gaithersburg, MD 1981 XS1100 Special "Spoiled Rotten" Just sold - currently bikeless!!
23mm float height
120 main jets
42.5 pilot jets
drilled stock airbox with K&N
Jardine 4 to 1 Exhaust
spade fusebox
1st and 2nd gear fix
lol thats a recover. u can tell on the bottom pan. it looks like new paint. and also on a 80 special it has the octipuss routing on the bottom of the seat pan.
Also said it sold for $55. Hope you did not get sniped out of your buy. Then again, if you thought it was a seat and its only the cover, might be good ju-ju workin for you if you did get sniped.
Life is what happens while your planning everything else!
When your work speaks for itself, don't interrupt.
81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection
Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750
sorry, yest it is a seat cover. he makes them. it comes with some foam as well. since i have a seat already i thought this was a good deal. i did not buy it on ebay, i called his number and made an offer and he took it. sorry for the confusion i just thought this was a good deal
Steve Josch
Toronto ontario
1982 xj1100 maxim owner
Comment