80 XS 11 Standard brake help

[andysutt]

Im about to tackle my brake problem.

I have a collapsed line on the right rotor on the front, so only the left works.

The rear I am totoally replacing and putting on new.

Would this work on the front? It's from a XS 650

http://cgi.ebay.com/ebaymotors/XS-650-Yamaha-upper-lower-disc-brake-lines_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1546Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem160323438528QQitemZ160323438528QQptZMotorcyclesQ5fPartsQ5fAccessories

Also, anybody have brake part numbers? I was going to call my local Yamaha place but they are closed on Sunday and mondays

[DGXSER]

Part numbers

Andy, try here for part numbers

http://www.cmsnl.com/yamaha-xs1100_model16834/

[andysutt]

Thanks

Sorry for asking "stupid questions"

I searched on bikerbandit and didnt see anything

[DGXSER]

No such thing as a stupid question.

[andysutt]

I didnt see brake pads there, but everything else.

I'll call the dealer 2morrow

[DGXSER]

You could order pads from Parts-n-More. I know I got pads for my Special there, I would think they carry Standards as well.

[andysutt]

Thanks, I'll search for that site.

[fredintoon]

Would this work on the front? It's from a XS 650

http://cgi.ebay.com/ebaymotors/XS-650-Yamaha-upper-lower-disc-brake-lines_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1546Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem160323438528QQitemZ160323438528QQptZMotorcyclesQ5fPartsQ5fAccessories

Hi Andy,
alas,no. I have a set of SS lines on my XS650 and Mr. Cheapskate tried to fit them on my XS11SG rather than spend all that money on new SS lines. The bitchin' things are about an inch too short! So I'm out two brake bleeding jobs for no good purpose.

[scalded dog]

ebay has brake pads on there all the time. Later 'Dog

[andysutt]

Hi Andy,
alas,no. I have a set of SS lines on my XS650 and Mr. Cheapskate tried to fit them on my XS11SG rather than spend all that money on new SS lines. The bitchin' things are about an inch too short! So I'm out two brake bleeding jobs for no good purpose.

Thanks for the reply

I got to digging thru the box of stuff I got w/ the bike, and there was a set of lines and calipers already in there. lol

I'll be swapping those out this weekend, weather permitting