Tweet
I wanna know where do i but the tail lights after I mount the saddle bags. I have a 1979 XS11.
-
-
Edgar - Welcome to the dark side. I've seen 'em with bags before, and the turn signals wind-up back by the tail light. Don't know if you can move the ones that are on it or if you need a complete new setup. Here's a pic (don't know whose bike it is, but it sure is purty)...
I think I have a loose screw behind the handlebars.
'79 XS11 Standard, Jardine 4/1, Dyna DC1-1 Coils, 145 mains, 45 pilots, plastic floats - 25.7mm, XV920 fuel valves, inline fuel filters, speed bleeders, Mikes XS pods, spade-type fuse block, fork brace, progressive fork springs/shocks, manual petcocks, 750 FD, Venture cam chain tensioner, SS brake lines -
The factory equipped hard baggers (standards anyway), came with bar that attached to the licence plate holder and relocated the turn signals.When a 10 isn't enough, get a 11. 80g HardbaggerComment
-
bags
edgar as i can recall i put the bags on first because my taillights are 24'' wide which end up in the middle of the bags wish i had a more direct back end pic bikes still in storage till the snow melts
Comment
-
It's a Special, but you get the Idea!
1980 XS11 Special aka The Monster
"My life used to be a Soap Opera, until I realized something, I own the network."
My Photo BucketComment
Comment