Tweet
I am getting ready to install my oil thermostat to my cooler and don't remember which line coming from the housing is out and which is in..? Anyone?
-
'81 XS1100 SH
Melted to the ground during The Valley Fire
Sep. 12th 2015
RIP -
Hey Jesse,
If your cooler is the OEM style with the fittings at 180 degrees apart, then according to my photos of one I had and sent to PlainDick, the outflow comes from the fitting on the right side of the adapter as it's mounted on the bike/engine , right side as you sit on bike! HTH?
T.C.T. C. Gresham
81SH "Godzilla" . . .1179cc super-rat.
79SF "The Teacher" . . .basket case!
History shows again and again,
How nature points out the folly of men! -
Hmmm... Maybe mine isn't OEM..my outlets are a lot less than 180 degrees...probably closer to 90... but it comes out the left side and back in on the right. You'll be able to tell for sure if you drop your filter cup.. but you probably don't want to do that if at all possible.
You could attach the lines, bump the starter a few times and see which line it (The oil) comes out??
TodTry your hardest to be the kind of person your dog thinks you are.
You can live to be 100, as long as you give up everything that would make you want to live to be 100!
Current bikes:
'06 Suzuki DR650
*'82 XJ1100 with the 1179 kit. "Mad Maxim"
'82 XJ1100 Completely stock fixer-upper
'82 XJ1100 Bagger fixer-upper
'82 XJ1100 Motor/frame and lots of boxes of parts
'82 XJ1100 Parts bike
'81 XS1100 Special
'81 YZ250
'80 XS850 Special
'80 XR100
*Crashed/Totalled, still ownComment
-
Mine is like yours tr. Mine are at like 90-100 degrees apart and when I disconnected the lines, I got a lot more oil (over a cup) out of the left side line.'81 XS1100 SH
Melted to the ground during The Valley Fire
Sep. 12th 2015
RIPComment
Comment