If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I've wanted to build an XS1100 racer like this one for a long time, does anyone have any info on this bike (or a similar one) What fairing/tank is that?
Welcome to the forum Hideki. Actually I think it is an XS. The bike has a Special front fork and looks like a shaft drive. If my old eyes are correct it's either a xs750/850 or a xs11. The chrome piece behind the carbs is like a xs750/850/1100. The brake discs and the calipers are right. Do you have a right side view that shows the pipes?
1979XS1100SF
K&N's and drilled airbox
Jardine 4in1
Dunlop Elite 3's
JBM slide diaphragms
142.5 main jets
45 pilot jets
T.C.'s fusebox & SOFA
750/850 FD mod.
XV 920 Needle Mod.
Mike's XS plastic floats set at 26mm
Venture Cam Chain Tensioner
That IS an XS11. The '750/850 have a different brakes on the front. With the rotors, I think an '80 or '81 Special was the starting point, as the front calipers look to be the "XS11 Special ONLY" style.
There was a thread here about fairing, and it had a link to a company you could order them from. I think you would need to start with a "bigger bike" fairing, and modify it to fit.
Welcome to the site, and watch the Rally threads for rides in and around California.
Ray Matteis
KE6NHG
XS1100 E '78 (winter project)
XS1100 SF Bob Jones worked on it!
Comment