Announcement

Collapse
No announcement yet.

Intake Mod

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    trbig did you get your K&N look alike pod filters from Parts-N-More or MikesXS?
    Parts-N-More ($12.00 each) has the same part number (Part#15-0035) as MikesXS ($16.00 each) but looks a little different. I don't like the Emgo ones that are on my bike right now.
    http://www.myspace.com/i_give_you_power

    1980 XS11 Special - chopped, dropped and OCTY is still installed - NOW IT'S FOR SALE! $1,800 OBO


    Famous Myspace quote:

    "Don't mess with TEXAS! It's not nice to pick on retards."

    It's funny because I am from TEXAS!

    Comment


    • #17
      Hey Yahman, what is the hose that is connected to the carbs? What size and what's it made for? Gas filler tank hose? Radiator hose? I'm looking for something like that. Thanks.
      79 F full cruiser, stainless brake lines, spade fuses, Accel coils, modded air box w/larger velocity stacks, 750 FD.
      79 SF parts bike.

      Comment


      • #18
        It's listed as radiator hose (part # RBR 24034) from CarQuest. Warning it's sold by the inch and it lists for $2.45 an inch... No that's not a typo. I can sell you some if you want it PM me. I used 1 3/8 inches per carb, 5 1/2 inches total.

        Larry
        Inventor of the YICS Eliminator. Want one? Get it here.
        http://www.xs11.com/forum/showthread...399#post183399

        If you're not riding, you're not living!
        82 XJ1100
        80 XS1100G (Project bike)
        64 Yamaha YA-6
        77 Suzuki TS-185

        79 XS1100SF Built this one for a friend.
        See it here... http://www.youtube.com/watch?v=cBYT4C9_6Ac

        Comment


        • #19
          I got my filters from http://www.aperaceparts.com/

          They won't have them listed on the site though, you'll have to call them. The part number is 005-121 for the oval ones like I have and were $59.95 plus shipping for all four at the time I got them. A little more than the cheap filters, but WAY less than K&N!


          Tod
          Try your hardest to be the kind of person your dog thinks you are.

          You can live to be 100, as long as you give up everything that would make you want to live to be 100!

          Current bikes:
          '06 Suzuki DR650
          *'82 XJ1100 with the 1179 kit. "Mad Maxim"
          '82 XJ1100 Completely stock fixer-upper
          '82 XJ1100 Bagger fixer-upper
          '82 XJ1100 Motor/frame and lots of boxes of parts
          '82 XJ1100 Parts bike
          '81 XS1100 Special
          '81 YZ250
          '80 XS850 Special
          '80 XR100
          *Crashed/Totalled, still own

          Comment


          • #20
            I have pods. I'm wanting some over sized velocity stacks to hook up to my high flow "stock" air box. I like the looks of the stock box.

            Yahman, let me check what I need and I will get back to you.
            Thanks all.
            79 F full cruiser, stainless brake lines, spade fuses, Accel coils, modded air box w/larger velocity stacks, 750 FD.
            79 SF parts bike.

            Comment


            • #21
              red bandit,

              I looked on the actual piece of hose that I have, it's made by Gates #24034 with a 2 1/8" (54mm) ID.

              Larry
              Inventor of the YICS Eliminator. Want one? Get it here.
              http://www.xs11.com/forum/showthread...399#post183399

              If you're not riding, you're not living!
              82 XJ1100
              80 XS1100G (Project bike)
              64 Yamaha YA-6
              77 Suzuki TS-185

              79 XS1100SF Built this one for a friend.
              See it here... http://www.youtube.com/watch?v=cBYT4C9_6Ac

              Comment

              Working...
              X