If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Ive noticed the bikes from australa/europe
have the foot pegs set back farther than the ones
from the states.
heres a cpl of pics,
is this wat ur after or do u want them further back?
pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
geniusloerts
either had i,until fairly recently when i took a closer look at the bike pics in the pics thread.
but they dont do ur knees
the world of good, lol
ive also noticed they sit up
a little higher as well, great for cornering
ive got another set on a parts bike
i mite b interested in swapping
pm if ur interested
AlanB
i never realized they are hard 2 come by.
pete
new owner of
08 gen2 hayabusa
former owner
1981 xs1100 RH (aus) (5N5)
zrx carbs
18mm float height
145 main jets
38 pilots
slide needle shimmed .5mm washer
fitted with v/stax and uni pod filters
Probably one of the least common models?.... I know that a couple of the UK guys had trouble finding stock 5K7 linkages and levers..... they are different to all the rest (except p'raps yours?)
Comment