Tweet
pics of work on fj fork
-
bill hane -
fj fork
ist pic shows 7/8 extender peice. thats right fj is bolt on just need to extend the neck 7/8 i welded mine in but red loctight
would have work just fine.
billbill hane -
I'd like to see some pics of it when your not running with the camera.I hate signatures. Too many cars and Bikes to list here.Comment
-
forkin fork
Hey Snowdog, that is a nice set of forks there, looks like you polished alot. Have a pic of the front wheel? Also, What are the fork length from axle to top clamp? Nice job, chopMDRNF
79F.....Not Stock
80G......Not Stock Either....In the worksComment
-
pics
thanks i knew i must be doing something
wrong dir. said point and click.
billbill haneComment
-
On a digital camera, MOST of them anyway... push the button partially down (Like halfway) for about a second. It will sense what it needs... exposure, distance etc... and THEN push the button. It will result in a MUCH higher success rate in good pics...
TodTry your hardest to be the kind of person your dog thinks you are.
You can live to be 100, as long as you give up everything that would make you want to live to be 100!
Current bikes:
'06 Suzuki DR650
*'82 XJ1100 with the 1179 kit. "Mad Maxim"
'82 XJ1100 Completely stock fixer-upper
'82 XJ1100 Bagger fixer-upper
'82 XJ1100 Motor/frame and lots of boxes of parts
'82 XJ1100 Parts bike
'81 XS1100 Special
'81 YZ250
'80 XS850 Special
'80 XR100
*Crashed/Totalled, still ownComment
-
I would guess that like a lot of lower end dig cameras, there just wasn't enough light. Most point and shoots just don't have large enough aperatures to get the low light shots w/o resorting to long time exposures. Anything longer than 1/60th of a second and it will be lucky unless your on a tripod. I ofter have to resort to the pod for my bike pics.'81 XS1100 SH
Melted to the ground during The Valley Fire
Sep. 12th 2015
RIPComment
-
xschop
the forks are whithin 1/2 inch of the xs i get a more exact no. and post tonite
billbill haneComment
-
diamond plate
Your diamond plate fork brace looks cool, but the arched design of the original FJ brace is what keeps the fork from tweeking opposite each other in a corner under load....MDRNF
79F.....Not Stock
80G......Not Stock Either....In the worksComment
-
chop
did you notice it's 1/2 inch the fj clamp to axel 291/2 inches xs is31 1/2 i ran it with
one inch sticking through the upper clamp
i want to get a 120-90-16 front tire it has
120-80-16 if there was a 17 inch rim for it that would be sweet here come pics.
billbill haneComment
-
pics
bill haneComment
-
retraction
Hey, those look good. I can see now that your brace itself is cross braced....How does it handle? I see you still have your R1 monoshock mod....Do you plan on underbracing the swingarm?MDRNF
79F.....Not Stock
80G......Not Stock Either....In the worksComment
-
one word
RADIALS! I will never go back...good workMDRNF
79F.....Not Stock
80G......Not Stock Either....In the worksComment
-
pics
one more time
bill haneComment
-
pics
bill haneComment
Comment