Announcement

Collapse
No announcement yet.

2nd gear question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2nd gear question

    Hi everybody, I've had this xs1100 since december. It has been a massive project bike. Thanks to this site I've gotten to where I have... although I believe this is my first post.

    I am finally putting miles on it and I think my 2nd grear is shot. The rest of the gears, the clutch, and the shaft are all solid, but everytime I get into 2nd gear and accelerate beyond a certian point the bike skips and bounces. I thought it felt like I am missing some teeth. The odd thing is I can accelerate fairly smoothly through second gear at a low RPM and with little throttle. Also, it downshifts through 2nd smoothly without a problem.

    Does this sound like anything anybody has experienced? Is it by chance an easy fix?

    On a side note, for what I can tell this bike is a frankenstein of mostly a 1980 XS1100 and many parts from a 1982 XJ1100. I have pieced together electrical systems, redone the carbs, the entire vaccuum assisted fuel delivery system was wrong, and have had a hell of a time finding brake parts and some random other items for it.

    I appreciate any input... and good work to anybody who adds to this site.

    Andy

  • #2
    Welcome,

    Congrats on your work so far. Now if you'll take a look at
    THIS FORUM and look in the Transmission section, you'll find about all the info you need!!
    T.C.
    T. C. Gresham
    81SH "Godzilla" . . .1179cc super-rat.
    79SF "The Teacher" . . .basket case!
    History shows again and again,
    How nature points out the folly of men!

    Comment


    • #3
      well the repair looks easier than I thought.

      Thanks for the quick response.

      It is still going to take me a long time to get to this working 50-60hour weeks.

      Guess I'll just keep shifting 1st to 3rd when I go riding...

      Comment

      Working...
      X