the new nightmare

[timsxs]

bought two 79 xs11 bikes niether ran i put one together and the first voyage was bad lost a rectifier and brakes are terrible have new front master on order going to rebuild rear cylinder but seals came out in pieces does anyone have a good pic of rear mastercylinder piston and seal layout also stumbled on a page i can't find again about someone who builds rectifiers

[John]

Look here for a drawing of the cylinder

http://www.yamaha-motor.com/sport/parts/home.aspx

and Geezer is the member who builds regulators

[prometheus578]

"Look here for info on Geezer."

http://www.xs11.com/forum/showthread.php?s=&threadid=11787

[timsxs]

thank you

thank you for the link to geezer i must have one of my seals on wrong in rear caliper it doesn't build much pressure any better pics also looking for a good guage set

[TopCatGr58]

Hey Tim,

Check out This tech tip in the Repairs, Brakes section . There are several newer tech tips that you can find when Scrolling down from the MAIN FORUM PAGE, not just the links in the left column!
T.C.

[jeffe]

This is the site for the reg/rec. Well worth it. Works better than stock.

http://www.oregonmotorcycleparts.com/Reg_rec_units.html