mods on emigo filters

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rizzo4u2
    XSive
    • Nov 2007
    • 49
    • hanover,pa.

    #1

    mods on emigo filters

    i have 52mm emigo filters that were used on my bike by using the original rubber sleeves that came out of the airbox, i seen how the original rubber does get in the way of the inlet side of the carb, instead of making all the extras i cut behind the second lip that goes into the airbox , having the edge still on it, took the rubber that came with the emigo filters out, and used these instead, they will fit in the cone filters with a little doing but they fit in great with a snug fit, and you still have the original opening with the proper airflow
    mike.s
  • randy
    XS-XJ Guru
    • Dec 2003
    • 4521

    #2
    emigo filters, are they the ones hecho in Mexico?

    Comment

    • rizzo4u2
      XSive
      • Nov 2007
      • 49
      • hanover,pa.

      #3
      i think so, samething shown as the pod mods in the other forum with81xsproject
      Last edited by rizzo4u2; 02-22-2008, 09:45 AM.
      mike.s

      Comment

      • TopCatGr58
        Administrator
        • Jul 2002
        • 12650
        • Portsmouth, Va.

        #4
        Hey Rizzo,

        Sounds great, take some photos and send them to me, and we'll see about adding them to the tech tip!
        T.C.
        T. C. Gresham
        81SH "Godzilla" . . .1179cc super-rat.
        79SF "The Teacher" . . .basket case!
        History shows again and again,
        How nature points out the folly of men!

        Comment

        Working...