Thanks, I will for sure do that as it does not take much time at all, and it would at least make me feel that I had done something to add power
--Nick
--Nick
Originally posted by pggg
If the head's still off, a quick/cheap 'power' mod - trim the intake port entrances to perfectly match the carb manifolds, it'll smooth /improve the flow, there's usually a slight mis-match there on the stock setup. Use a small grinding stone in either a dremel, drill, or best of all a die-grinder
If the head's still off, a quick/cheap 'power' mod - trim the intake port entrances to perfectly match the carb manifolds, it'll smooth /improve the flow, there's usually a slight mis-match there on the stock setup. Use a small grinding stone in either a dremel, drill, or best of all a die-grinder
Comment