Mikesxs float needles

[81xsproject]

Which of these float valve is for the 70 xs11 carbs?

[Crazcnuk]

Carb Float Valve (Needle & Seat)
Carb Float Valve (Needle & Seat) - Push in type with O-Ring seal, needle & clip.
Fits: XS650G/H/SH/SJ/SK/SL (1980-84) stock Mikuni BS34 CV carbs.


Part #48-1445 $10.00 USD EA.


These are the ones I used, for an '80. THe carbs on the XS are BS34 models.

These are further down the same page you were looking at.

[TopCatGr58]

Hey Jesse,

For YOUR BIKE, what Cnuk said, but for the earlier 78-80 carbs, you want the 48-5019 set. Some research reveals the OEM part numbers below!

70XS650
168-14190-20-00 VALVE SEAT ASS'Y (NO. 2.0)

73 650
168-14190-20-00 VALVE SEAT ASS'Y (NO. 2.0)

79 650
168-14190-20-00 VALVE SEAT ASS'Y (#20)

79Fxs11
1J7-14190-20-00 VALVE SEAT ASS'Y (02.0)

Now, I know the prefix is different, but the important thing is the size shown....20 or 2.0! If you look closely at the picture of the 48-1429 is shows it's 2.5!


Here's an old thread where MRO bought the MikesXS ones and they fit .

I remember someone posting though about getting some MikesXS float valve/needle seats but they were the wrong size/type but don't remember who or which ones?
T.C.