Identify this Exhaust (Please!)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Da-Bubble
    XStremely XSive
    • Jun 2006
    • 353
    • Oklahoma City, OK

    #1

    Identify this Exhaust (Please!)

    Can anyone identify this exhaust? I just bought a set off ebay for cheap and I don't even know what they are...

    Bike on Ebay


    The crappy set I bought


    I have a Kerker 4-1 on it now but they're pretty squished on the bottom. I'm gonna clean this set up as an extra.
    1979 XS11 Special (slightly modified)
    dubbed the "Mad Mosquito"

    MikesXs Pod Filters
    MikesXs 35k Coils
    8mm plug wires
    42.5 Pilots 142.5 Mains
    (Carb tune by GNEPIG Performance)
    Kerker 4-into-1
    Shaved emblems
    Progressive frt springs lowered 1.5"
    Progressive 11.5" rear shocks
    Harley Dyna rear fender chopped
    Custm side mt tag (apparently illegal)
    Custom Dual Headlights
    Lots of time and hard work.
  • Da-Bubble
    XStremely XSive
    • Jun 2006
    • 353
    • Oklahoma City, OK

    #2
    You can't tell me nobody knows what exhaust this is! Or did I just not do it right and you can't see the pictures?
    1979 XS11 Special (slightly modified)
    dubbed the "Mad Mosquito"

    MikesXs Pod Filters
    MikesXs 35k Coils
    8mm plug wires
    42.5 Pilots 142.5 Mains
    (Carb tune by GNEPIG Performance)
    Kerker 4-into-1
    Shaved emblems
    Progressive frt springs lowered 1.5"
    Progressive 11.5" rear shocks
    Harley Dyna rear fender chopped
    Custm side mt tag (apparently illegal)
    Custom Dual Headlights
    Lots of time and hard work.

    Comment

    • DiverRay
      Moderator
      • Nov 2004
      • 7602
      • Star, IDAHO

      #3
      We just can't tell. I run an old Kerker on Daily Ride, and I don't think it looks like that. I KNOW the muffler is different. It could be a MAC, Jardine, or any number of older systems that are no longer made. With the dent in the tube, I hope you didn't pay too much for it.
      Ray Matteis
      KE6NHG
      XS1100 E '78 (winter project)
      XS1100 SF Bob Jones worked on it!

      Comment

      • Erik the Red
        XStremely XSive
        • Oct 2005
        • 422
        • Northern MI

        #4
        might be Jardines...

        I have a set of Jardine 4-1's on Rhona, and this (the set on the bike) looks to be pretty dang similar. On mine, "Jardine" is engraved in small thin letters on the rear bracket where the muffler bolts to the frame.
        -Do what makes you happy.

        '79 Honda CB 750 K (2)
        '78 XS 11 E - "Rhona"
        ...and a 2nd E, for the goodies on it.

        Comment

        • Da-Bubble
          XStremely XSive
          • Jun 2006
          • 353
          • Oklahoma City, OK

          #5
          Well thanks for responding. I only paid $79 shipped which isn't bad from what I've seen old systems going for. I've got a sandblaster and some cans of ceramic header paint. I just hope the only dent is the one pictured and its not squished flat like my Kerker.

          Thanks Again!!!
          1979 XS11 Special (slightly modified)
          dubbed the "Mad Mosquito"

          MikesXs Pod Filters
          MikesXs 35k Coils
          8mm plug wires
          42.5 Pilots 142.5 Mains
          (Carb tune by GNEPIG Performance)
          Kerker 4-into-1
          Shaved emblems
          Progressive frt springs lowered 1.5"
          Progressive 11.5" rear shocks
          Harley Dyna rear fender chopped
          Custm side mt tag (apparently illegal)
          Custom Dual Headlights
          Lots of time and hard work.

          Comment

          • pggg
            XS-XJ Guru
            • Nov 2004
            • 1609
            • NZ

            #6
            Exhaust paint is no good on headers, it's thin and flakey, the pipes'll still rust and corrode eventually, sometimes quickly depending on conditions, the permanent fix is a Jet-hot or HPC coating, these header pipes have HPC black, guaranteed rust/corrosion proof for life, good stuff

            Comment

            • Da-Bubble
              XStremely XSive
              • Jun 2006
              • 353
              • Oklahoma City, OK

              #7
              I might do that someday if I had nice pipes, but for now the old rusty, squished kerkers that came with the bike will have to make do with spray paint. I have no problem pulling them off every year or so and redoing them. It only took a couple hours to sandblast and shoot them.

              Rusty

              SandBlasted

              Painted
              1979 XS11 Special (slightly modified)
              dubbed the "Mad Mosquito"

              MikesXs Pod Filters
              MikesXs 35k Coils
              8mm plug wires
              42.5 Pilots 142.5 Mains
              (Carb tune by GNEPIG Performance)
              Kerker 4-into-1
              Shaved emblems
              Progressive frt springs lowered 1.5"
              Progressive 11.5" rear shocks
              Harley Dyna rear fender chopped
              Custm side mt tag (apparently illegal)
              Custom Dual Headlights
              Lots of time and hard work.

              Comment

              • pggg
                XS-XJ Guru
                • Nov 2004
                • 1609
                • NZ

                #8
                Here's mine on their umpteenth paint job

                Comment

                • Ken Talbot
                  XS-XJ Super Guru
                  • Jun 2002
                  • 4251
                  • Revelstoke, BC

                  #9
                  Gee, I didn't know they made a high temp pink paint...
                  Ken Talbot

                  Comment

                  • pggg
                    XS-XJ Guru
                    • Nov 2004
                    • 1609
                    • NZ

                    #10
                    Ken, yep, 'flame red' turned 'gay pink!'

                    Comment

                    Working...