Announcement

Collapse
No announcement yet.

Carb jetting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carb jetting

    HI, I hope someone can help me. I have a 81 SH. I am running a 4 into 1 jardine system, pod filters.
    Could somone tell me what the recomended jetting would be?
    Also does the pilots need to be changed?
    The bike runs real good but its not as strong as I think it should be
    Thanks for your help.

  • #2
    Take a look HERE in the Mods Tech Tips !

    Secondly, I also have an 81SH, with 4-1 pipes and pods, and I run 117.5 mains....dyno run a few years ago said I possibly could go up another size to 120. I run the stock pilot jets turned about 2.5 turns out, and runs fine and strong!

    I also have a little big bore kit in it!
    T. C. Gresham
    81SH "Godzilla" . . .1179cc super-rat.
    79SF "The Teacher" . . .basket case!
    History shows again and again,
    How nature points out the folly of men!

    Comment


    • #3
      HI, Thanks for your response. Are you talking about the pilot screws on top of the carbs turned out 2.5 turns? The air mixture screws? I als am running the stock 42.5 pilot jets. I have not adjusted the pilot screw yet. Thanks for your help. Jim

      Comment

      Working...
      X