Understanding Carbs 101

[underdog57]

Originally posted by Douglas Money
Underdog, the warbling problem was previous to me replacing the needles and seats. Now, it just doesn't want to stay running. It runs horribly and almost as if it needs more fuel.

I was talking about the jet needle . The long needle that goes in the emulsion tube . It it the one that is connected to the slide .
Goes up and down on accereration ...
nothing to do with the float ...
I think that is the warbling issue ...
I'm still being educated , so might be wrong ...

These floats are tricky to set I thought . I rotated the carbs to seat the float needle wire on the tang of the floats.That seemed to get repeat measurements ..

Bob

[Douglas Money]

Thanks, I will check that over the weekend. I appreciate everyones help.