Tweet
Anyone know where I can get a Front MC reservoir. I know randy sold a few a while back. MY bike fell over while I was out of the garage yesterday. I still can't figure out how this happened. The MC caught the fall on the metal shelf next to it. Besides destroying the shelf, it seems that the reservoir might have been damaged. THe outiside has been cracked for a while, but a hairline crack must have formed on the inner layer because it drips now. I can not actually see the crack. It has always been a little warped. I do not have the money to buy a new MC. Any info?
-
United States Merchant Marine Academy, Kings Point, NY
If I can do it at 18 yrs old, anyone can
"You know something, You can't polish a turd"
"What are you rebelling against", "Well, what do you got?"
Acta Non Verba -
There is one up on ebay now. It looks to have cracks like yours, but might be worth a shot.
http://cgi.ebay.com/ebaymotors/YAMAH...spagenameZWDVW -
Re: Front MC reservoirs
Are you just talking about the plastic? I've just declared my MC dead from way too much rust. The plastic is still good. I even have a brand new top for it.Originally posted by HobbyMan
Anyone know where I can get a Front MC reservoir. ... Any info?
It's yours if you want it. I'm just tossing it out otherwise. It's from an '80 SG.
EricEric Roellig
1980 SG w Windjammer V & KG hard bags
**Very first bike**
Current condition: Running!!! Lead, follow or get the #^%# out of my way!!!!!!Comment
-
Yes. I am just talking about the plastic. The problem is that I need one from a standard. I do believe they are different. Someone correct me if I am wrong. I wonder if they could be machined out of aluminum?United States Merchant Marine Academy, Kings Point, NY
If I can do it at 18 yrs old, anyone can
"You know something, You can't polish a turd"
"What are you rebelling against", "Well, what do you got?"
Acta Non VerbaComment
-
KTA
I can't get that link to work.United States Merchant Marine Academy, Kings Point, NY
If I can do it at 18 yrs old, anyone can
"You know something, You can't polish a turd"
"What are you rebelling against", "Well, what do you got?"
Acta Non VerbaComment
-
The plastic reservior is different betwen the two models and will ot interchange. I will take that Special reservior if you're looking to get rid of it, though.Comment
-
John, They are yours for the taking. It is the reservior, cap, rubber diafram, 4 screws and 1 brand new cap. What are they worth? I'm not looking for premeum $$$$... Send me a PM with your address.Originally posted by John
The plastic reservior is different betwen the two models and will ot interchange. I will take that Special reservior if you're looking to get rid of it, though.
EricEric Roellig
1980 SG w Windjammer V & KG hard bags
**Very first bike**
Current condition: Running!!! Lead, follow or get the #^%# out of my way!!!!!!Comment
-
Thank Eric
PM sent.Comment
-
I've still got a couple of the units Randy was selling. I bought his remaining stock when it looked like sales slowed. Price is still US$39 including airmail shipping anywhere in the world. PM me if you're interested.Ken TalbotComment
-
For $76 (I think) www.partsnmore.com has the all metal master cylinder. Never worry about it breaking again.
It's in the upper right hand corner of their home page.
I have one on both my XS's.Pat Kelly
<p-lkelly@sbcglobal.net>
1978 XS1100E (The Force)
1980 XS1100LG (The Dark Side)
2007 Dodge Ram 2500 quad-cab long-bed (Wifes ride)
1999 Suburban (The Ship)
1994 Dodge Spirit (Son #1)
1968 F100 (Valentine)
"No one is totally useless. They can always be used as a bad example"Comment
-
I replaced mine with a used MC from either a Radian or Fazer. Around $30 . Muck lower profile..78E ... Gone but not forgotten
2006 Kawasaki Concours....just getting to know itComment
Comment