'80 G Carbs...

[TopCatGr58]

Well,

At 3K feet above sea level, you will be running RICHER than if you were running at sea level! I'm at sea level, and I still run the OEM 42.5 pilot jets, I would think that you probably won't need to go to the 45's! However, wondering about the 120's possibly being a bit too rich, however Yamaha did use 120's in stock configuration for some bikes, and so hopefully the 110's are actually a bit lean for emissions purposes so the 120's won't be too rich!?
T.C.

[Crazcnuk]

Oh sure! Now I really need the 117s!

I live at 1035 Meters above sea level. Highest point on the Yellowhead (highway that runs from East Manitoba to Kamloops B.C.)

[Crazcnuk]

Ordered 4 kits, 4 #120 mains and 4 #45 Pilots, just in case, from MikesXS.

Will see how that goes.

[Crazcnuk]

Got the carb parts today. Really fast, from MikesXS~!

[HobbyMan]

I got some kits from partsnmore. I don't know if it was my specific kits or not, but the floats leak more than my old ones. I know it is not my petcocks. The new float valves have never worked right. An hour after I shut if off, I can crank as long as I want, but it wont start until I open the throttle wide open. the velocity stacks are wet all the time. Can you buy just the float pins?