Clutch Cover Mod

[xschop]

Here's another mod I am about to finish. This one I used 'Alumaweld' to insert a 19mm aluminum disc into the side cover. I tried polishing but the two different alloys don't match, so I am going to just use engine paint after sanding.....chop

[red bandit]

If you would have someone weld it in place it would probably match.
Red Bandit

[xschop]

good idea

I already have one that I was going to take to the weld shop for the Blue Streak....

[pggg]

Here's the one on mine, POR15 engine enamel goes on thick with a paint brush and sets hard - way better than any rattle- can stuff.