mikes square inline fuel filters

[bbs1980xs1100g]

Has anyone used these square inline filters on an 11. (part # is 20-0013). tell me pros and cons if any please.

Im also ordering the mixture screw kit( part # 48-5012) with the oring washer and bling plug, these fit an 80g right i think ive read it here before. i was cleaning my carbs and i noticed 3 of the 4 orings were gone. Its idling very low.

do the petcock washers from mikes (part # 20-0018) fit an 80g , the washers that go on the mount screw

[TopCatGr58]

I've used and am still using the fuel filters, easy to see the fuel, and contaminants, they aren't too big, but are a little bigger than the small round lawnmower style!

The rubber/metal idle screw washers are the correct ones, but you don't need to reinstall the blind plug!!

Those felt washers should be just fine for the mounting bolts for the petcocks! I just used some neoprene faucet washers!
T.C.