I didn't do any heating etc. for the frame welding. I just prepped the area by sanding and cleaning the surface. I haven't had any major issues with the welds yet. Well, except for my exhaust... There was a flange that broke by the right footpeg. I placed additional supports in that area, but it may fatigue again. Especially since I recently scraped the exhaust pipes doing a right hand turn at speed the other day...
Announcement
Collapse
No announcement yet.
Hacked up XJ11
Collapse
X
-
skids
I have welded the break once and even scabbed some reinforcement on it, but it broke again behind the weld.
sounds like your welder was set a little too hot for the thickness of the metal your welding. (BT, DT)
mro
Comment
-
Thanks, MRO. I will have him turn it down to where it almost sticks the rod!
Originally posted by mro
skids
Hi ya Skids,
sounds like your welder was set a little too hot for the thickness of the metal your welding. (BT, DT)
mroSkids (Sid Hansen)
Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.
Comment
Comment