Custom clutch cable

[AKMac]

Does anyone know where I can get a custom length clutch cable, or a cable that has a 90 degree bend in it similar to the throttle cable. I have super bike bars on mine so I had to route the cable across the key switch on the other side of the tank to make it look decent, but I'm sick of having to lift the clutch cable to get the key in. I think a cable with a bend in it would work best because the cable likes to hit the triple tree. You can see what I mean in this picture:



On a side note, it's my 22nd birthday tonight so if the weather clears I'm taking Volatile out cruising for some chicks tonight !

[79XS11F]

I also have similar bars on my bike and I'm using the standard cable. i have it running accross the main switch as you do but then I routed mine stright down behind the headlight ear and headlight to ear bolt, then back under the tank through the wiring guides and to the clutch. There's a little inward curve in the top triple tree just to the left of the fork and the cable just rests in there under its own tention. It looks OK and works without binding. This way NO "special short cable is needed.
Rob

[79XS11F]

I don't think you will be able to avoid that cable going across the main switch because of the proximity of the levers end to the triple tree. I have mine pull strapped out of the way of the main switch so it's not too much trouble.
Rob