Announcement

Collapse
No announcement yet.

XS11 Vetter gear on Ebay

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • XS11 Vetter gear on Ebay

    I found these on Ebay, the freight would kill me but someone here might find them interesting.

    Ebay No's

    4635854153
    4635859429
    4635866271
    4635867345

    I wish I could find something like that here in Oz, I'll keep looking.

    Dan
    Last edited by Stralya; 04-29-2006, 04:23 PM.
    Automotive Imbecile.
    Proud owner of 'The Swiftcicle'. (Swifty for short)
    '78E Full Vetter Dresser.
    1196 Big Bore Kit.

  • #2
    Thats a nice set, for sure. Loooks like the fitting is for a standard.

    I'd love to find a set like that for a special.
    80 XS1100SG
    81 XS400SH

    Some men miss opportunity because it is dressed in overalls and looks like work. - Thomas Edison

    A Few Animations I've Made

    Comment


    • #3
      You don't have to limit your searches to XS11 Vetter stuff. Th eonly real differeance was often the mounting brackets, and even though were often "Close Enough" I know my H has a goldwing set on, doubt you could tell from looking at it.
      I've been in more than one Hemisphere, and I wrote a book to help you do it too (or just prepare better for that week long road trip). Going Small, not just for the little guys.

      Comment


      • #4
        Hey Pain,

        You're right, I have a Vetter Winjammer with the rectangle headlight and the upper bracket, looking for the lower brackets, and panniers and top boxes are really hard to find unless you want to pay a grand or more..*sob*

        The wrecking yards are my best bet I think
        Automotive Imbecile.
        Proud owner of 'The Swiftcicle'. (Swifty for short)
        '78E Full Vetter Dresser.
        1196 Big Bore Kit.

        Comment


        • #5
          Mounting brackets?

          The ones I've seen don't look like they would be that hard to make. Some tubing and flat steel??? Little bend and weld


          mro

          btw
          recently repaired a front mounting bracket. Would not be that hard to make.



          mro

          Comment


          • #6
            There is only a small difference between the Vetter bag mounts for the special and the standard XS11. It's the location of the rear foot peg mounts and you can either modify the mounts or buy a slotted steel strap from the hardware store to fill the gap...

            Geezer
            Hi my name is Tony and I'm a bikeoholic.

            The old gray biker ain't what he used to be.

            Comment

            Working...
            X