i have an 81 xs850 motor final drive etc. on a 79 xs750 frame using the wiring harness from the 79 as well and carbs. my issue is after 8 months of putting bike together i have spark but thats it .was i supposed to do something to make everything work since im usung the 79 harness on a 81 engine
Announcement
Collapse
No announcement yet.
i admit i need help
Collapse
X
-
Howdy from a fellow 750/850 owner
Wrong site. This is the 750/850 big brother's site. However, it's pretty much a straight swap. Are you using the Hitachi's from the 850, or the Mikuni's from the 750?1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.
-
You'll need to bump those jets up on the pilot and main circuit.1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.
Comment
-
Originally posted by BhamminXS View Post79 harness on a 81 engine
Shoot a note to member "Radioguylogs". Mike has a couple of those and is likely a very good source for XS750/850 information.
I have ABSOLUTELY NO IDEA if Yamaha did similar upgrades/changes to its 750/850 in '81 as it did to the "Big Brother" XS11.....BUT the mechanical advance and CDI were changed so if your combining any of those parts on an XS11 across those years you're in for trouble. I know it would be best to discuss this with a person with REAL knowledge, not a guesser like me on this topic.
Mike would very likely be a great source of solid and correct information.
Sincerely,Kurt Boehringer
Peachtree City, Georgia
1970 - CT70K0 - Mini-Trail
1978 - SR500 - Thumper
1979 - CT70H - Mini-Trail
1979 - XS1100SF - Pensacola
1980 - XS850SG - Rocky
1980 - XS1100SG - The Ugly Duck
1980 - XS1100SG - Mayberry Duck
1981 - XS1100SH - DEAD Duck Cafe'
1981 - XJ550 Maxim - Nancy's Mini-Max
1982 - XJ650 SECA - Hurricane
1986 - FJ1200 - Georgia Big Red
1992 - FZR1000 - Genesis
2016 - FJR1300A - Montgomery
Comment
-
I have two 750's, and three 850's.
It's a straight swap. His only issue would be if he had a '77 2D, which did not have electronic ignition, but he's using the '79F engine. He's got spark, he's got fueling issues. The '79 used the better MK II's. As I said, you'll need to increase your jet sizes.1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.
Comment
-
Spark Timing?
I don't see any inherent reason why your combination of parts wouldn't work.
One common problem is the timing key on the end of the crankshaft is a small pin that can slip too deeply into the crankshaft, allowing the timing to be wrong.
Apparently, you are using the Mikuni carbs on an engine that had Hitachi carbs when it was built. Like Ian said, it's not a problem...just need to adjust the jet sizes for the larger displacement. You can find the information by searching on the Triples website:
http://www.yamaha-triples.org/category-view.asp
If the valves are in good order, and the engine is getting gas, and there is a spark, then it seems the spark timing is in left field.-Mike
_________
'79 XS1100SF 20k miles
'80 XS1100SG 44k miles
'81 XS1100H Venturer 35k miles
'79 XS750SF 17k miles
'85 Honda V65 Magna ~7k miles
'84 Honda V65 Magna 48k miles (parts bike)
'86 Yamaha VMAX 9k miles
Previous: '68 Motoguzzi 600cc + '79 XS750SF 22k miles +'84 Honda V65
Comment
-
Originally posted by BhamminXS View PostI understand these are the xs1100 forums but thought I posted u
Under the other bikes discussion forum-- Scott
_____
♬
2004 ST1300A: No name... yet
1982 XJ1100J: "Baby" SS Brakes, '850 FD, ACCT
1980 XS1100G: "Columbo" SS Brakes, '850 FD, ACCT
1979 XS1100SF: "Bush" W.I.P.
1979 XS1100F: parts
2018 Heritage Softail Classic 117 FLHCS SE: "Nanuk" It's DEAD, it's not just resting. It is an EX cycle.
♬
Comment
-
Mike is referring to the "reluctor". It fell out on me before too, and caused a no-start condition.1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.
Comment
-
Picture of the pin
I was thinking about the pin #9 in this diagram:
http://www.partzilla.com/parts/searc...NOR/parts.html
Until I looked up the '81 models, I had no idea the three pick-up coils changed to discrete parts in place of the 3-in-1 module used in '78-'80.-Mike
_________
'79 XS1100SF 20k miles
'80 XS1100SG 44k miles
'81 XS1100H Venturer 35k miles
'79 XS750SF 17k miles
'85 Honda V65 Magna ~7k miles
'84 Honda V65 Magna 48k miles (parts bike)
'86 Yamaha VMAX 9k miles
Previous: '68 Motoguzzi 600cc + '79 XS750SF 22k miles +'84 Honda V65
Comment
-
Yeah Mike. I remember the issue of those pins "disappearing" into the case for many forum members.1979 XS1100F
2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.
Comment
-
mike are you saying one of the pins themselves could of fallen out maybe when i switched out the frames seeing as i did it alone using the lay on side and remove frame method,( was the only way i had actually). Ian ive been through both repair and owners manuals and nowhere did i see mention of a reluctor, im so confused now.79 xs 750, 81 xs 850( custom ), 81 xv 750; 80 G XS11 Standard
Comment
-
just trying to sort out things, so i need to go big on the jets , both jets or only the mains, and the coils since i used a 79 harness and coils ( they came off the same bike and they are three separate coils not a three into one setup so where do i go with that?79 xs 750, 81 xs 850( custom ), 81 xv 750; 80 G XS11 Standard
Comment
-
the mains im good on as i ordered the right size from the yamaha dealership but ive been told that might not be a safe bet anyways as the dealerships dont use mikuni jets so it could still be wrong if thats the case does anybody know where i might quickly find and get mikuni jets?79 xs 750, 81 xs 850( custom ), 81 xv 750; 80 G XS11 Standard
Comment
Comment