Announcement

Collapse
No announcement yet.

Carb part ID assistance...

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Carb part ID assistance...

    Hey guys, can anyone ID the black o-ring in this kit? Link below.

    Is this for the pilot jet, looks too big for under the airscrew...

    My wife's uncle is doing the carbs on his 83 XJ750 (Seca) and some kits have this part, some don't. Want to guide him in the best way to go.


    http://www.ebay.com/itm/K-L-Carburet...#ht_983wt_1328


    Thanks!
    Howard

    ZRX1200

    BTW, ZRX carbs have the same spacing as the XS11... http://www.xs11.com/forum/showthread.php?t=35462
    Tags: None
  • #2
    O rings I can think of include the TINY one under the air mixture screw, the one around the needle seat, the one on the drain bolt. Pic is really poor, but it could be the drain bolt one - that is about 3mm dia or so.

    John
    John is in an anonymous city with an Alamo (N29.519227,W-98.678980)

    Go ahead, click on the bikes - you know you want to...the electrons are ready.
    '81 XS1100H - "Enterprise"
    Bob Jones Custom Navy bike: Tkat brace, EBC floating rotors & SS lines, ROX pivot risers, Geezer rectifier, new 3H3 engine

    "Not all treasure is silver and gold"

    Comment

    • #3
      It looks too big for the tiny one under the airscrew.

      Ahhhhh... for the float bowl drain screw...

      Any other takers, or is JW gonna be the winner?
      Howard

      ZRX1200

      BTW, ZRX carbs have the same spacing as the XS11... http://www.xs11.com/forum/showthread.php?t=35462

      Comment

      Previous template Next
      Working...
      X