Replacement Fuse Blocks and Possibly TERMINALS

[2bhappy]

TC,

Put me down for 2 when you have some available.

Thanks,

Marc

[DiverRay]

TC,
PM me when you have two you can send out. I need one for the winter project, and I would like to redo the system on the daily ride.
Ray

[motoman]

fuse block

Looks very simple and very functional, and trouble free T.C. Put me down for one if you'll have an extra! Email me when you get them, and are ready to send them out. Thanks.

[chevy45412001]

cost?

so whats the final tally there TC? i see they are really cheap.

[TopCatGr58]

Fuseblocks are in and going out!!

Hey folks, thanks for your patience, the fuseblocks arrived today, I'll be packing them up and shipping them out ASAP!! They are better quality than I was expecting, see photo below. They have a rubber pressure seal, and a positive locking mechanism, and are notched to only fit one way, and you can see the blades on BOTH SIDES!!! I took this with my NEW little Olympus Dig Cam, resized it to 640x480ish, added the text, NO FLASH, just standard macro and Incandescent light white balanced!

I'll be placing the next batch order tonight!!

[81xsproject]

Awesome, I found one at a parts store one time and was excited until I realized it had the universal ground setup. Of course it was the only one they had. So, keep me signed up for 2.
thanXS TC

[TopCatGr58]

Jesse,

They do offer a Gang type circuit, where you have 1 large wire input, and then have several fused outlets, but this box is designed to fuse EACH pair of wires that come across the fuse block.

Here's a photo of a 4 Way in the same format, but the angle is slightly higher and you CAN SEE The tangs on the other side of the block...PHEW, you had me worried there for a minute!!


T.C.

[81xsproject]

I had a question about the blocks, TC. I noticed, from what I can see in the pic, that there are 6 fuses and 6 plugs. Are there plugs on the opposite side, or does it work by a common ground, or what?

[Pete J]

Please put me on that list to thats a great deal thanks

[DeanR]

TC, Put me on the list!

[TopCatGr58]

Hey there Jesse, and the rest,

This batch went quickly, I'll be ordering another batch as soon as I get the $$ for these, and then I'll be happy to be the distributor for these here on the list. I'll post again when I get the next batch in. Thanks everybody, and you're welcome also!!
T.C.

[81xsproject]

I want two, TC. Let me know how I can send you the money.

[TopCatGr58]

Hey folks,

I think it was Geezer that had shown me this web site where I could order replacement fuse blocks at a much better price than buying from local auto store. Also, the ones I've seen available lately at the auto store are very tall, won't fit properly under the side cover, and are at leats $15.00 or more!!

Well, I just ordered a small batch of 5 to get the minimum $$ for an order, I'll be using 2, and 1 is for Trbig/Tod. That'll leave 4 for the taking! I figure I should be able to package and mail them for about $9.00ea, 1/2 of what you'd have to pay at the store!

Send me a PM if you want one, and I'll give you my PayPal address!

73820 - ATC 6-way Fuse Block


DelCity web site catalog page for Fuse Block

*****************************
Update, go to Page 8 of this thread for the Terminal connectors INFO!