If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My first street ride..had to ride 24 miles to get to the test area so I could get my license.Had to go to hardware store to get a license to drive there..nutz.
Learning to ride in the rain,stay loose and don't tense up,it is not that bad,stay out of the oil drip line and watch out for tar snakes they will give a little OH Chit once in awhile.
Just beware of what is around you,front back and sides...enjoy.
Oh yeah watch out for the painted lines in the road especially when wet,they musta changed the paint formula around here,have a stop bar about two feet wide on a bit of a hill and I just barely make it across without sliding when I first start out.
Semi flowtation glass beads for reflectivity is major cause of wheel slipping. So, definitely watch crossing the lines in a curve, wet OR dry! Just a word of advice from one who stripied the highways 15 of my 31yrs. employed by Colo. Dept. of Transportation.
81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.
Just on the Western Slope of Colo. Majority of states contract out the highway striping, among other duties. If you happen to observe one striping, you'll see beads coming out of a bead gun behind the paint gun. What makes STOP bars and such so slick at intersections is the fact that they are cut out thermo-plastic patterns cut out, layed down and then heated with a propane gun in order for them to stick to the pavement. So yes, stop bars and such are really slick, wet or dry, and will throw back of bike off taking off from an intersection. Some applications are recessed in pavement, but still really slick. Just another hazard for us ALL to be aware of.
81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.
I agree Moto those beads are slick and a hazard I have a little experience with but in the rain and fog at times its the only thing giving enough reflectivity to see where you are.Many people in cars when they can't see they are all over the road their side your side and I know you don't want anyone else on your side you been there done that!
To fix the problem one should not make more assumptions than the minimum needed.
Keep your head UP. Look way down the road. Watch your mirrors. Stay out of other vehicle blind spots. Keep your mind in the game...you are riding everything else can wait until you arrive. Enjoy the ride.
Phil
1981 XS1100 H Venturer ( Addie)
1983 XJ 650 Maxim
2004 Kawasaki Concours. ( Black Bear)
When I got my bike in 1980 I was in the military and they had a real problem with young riders getting injured and killed on bikes so the base course was structured to reduce statistics. You had to pass with a 100% score and to bring a bike on Base you had to have a base permit so it really controlled issues with military personnel riding motorcycles. These were rules the instructor put up as best I can remember.
Basic rules of the road for Motorcycles on this base.
1 Everything put on the roadway is designed to make you slip slide wreck or run over you.
2 At the very best your brakes may not stop you in time to prevent you from hitting something but will stop you fast enough that anything behind you will run over you.
3 Most can not see or hear you on the road and if they do, see you as the problem.
4 Police look for easy tickets and tag you are it.
5 Generally cars and trucks do not dodge the squirrel or dog unless they can hit you doing it.
6 Motorcycle riders who loose concentration and focus are called statistics.
7 This course was specifically designed by the State Police Motorcycle Police Training Program and implemented here to reduce statistics.
Many people failed and hated the course because it was so nitpicky but lots of good thought processes and even though I had a lot of experience by then taught me a lot.
To fix the problem one should not make more assumptions than the minimum needed.
Comment