Hey guys!

[JerseyJon]

Holy crap is that funny

I love how you cram xs11's into your Subaru! Those pictures are priceless. And it's cool to hear about your wheelin and dealin. Good luck with the build; can't wait for more pictures.

[jetmechmarty]

That Subaru took a beating! You appear to be way ahead of the game, so far.

So, what are you workin' on? Did you keep an SG, or the '81 model?

[DesmoBro]

Actually have 2 videos i took while unloading the bohemeth maybe they will work here?

[DesmoBro]

So whats leftover is a complete 77 and 79 and quite a few parts from the first freebee....

[DesmoBro]

Few tanks and seats to choose from gonna try and run one of these big tanks on my SR250

[Prisoner6]

Where there's a will, there's a way, right Desmo?

Nice job getting those bikes home in (and on) the Subaru!

Smart of you to include the disclaimer in the video, though:

"Do not try this at home!"

[tomcos67]

new owner

Cracking me up looking at picks.good luck....

[DesmoBro]

Any idea how to get this apart? The rear master doesnt seem to be tossing any fluid i saw very little about the rear master in the brakes write ups

[bikerphil]

It looks like you have already removed the snap ring. Take that slotted top washer out by prying under it with a small screwdriver, then grab the piston with those pliers and start pulling/rocking it out. Keep cleaning/scraping the crud out of the top if it refuses to come out.

[DesmoBro]

Thanks Phil
I hate that washer!

[DesmoBro]

So it came apart and this broken rubber seal may have had something to do with it...do they sell these new? ...i started pulling apart another rear master but it was worse and broke my circlip pliers so i get to buy those again woohoo

[bikerphil]

Rebuild kit for all XS11 rear MC except the 81 MNS....

http://www.ebay.com/itm/K-L-Rear-Mas...2fc67f&vxp=mtr

[MPittma100]

Kit

Rebuild kit for all XS11 rear MC except the 81 MNS....

http://www.ebay.com/itm/K-L-Rear-Mas...2fc67f&vxp=mtr

The ad says "rear". The picture shows a front kit, but is likely the correct p/n.

[bikerphil]

Here are some more...

http://www.ebay.com/sch/i.html?_from...ebuild&_sop=15

[DesmoBro]

So i took all the rear masters i had apart ...put together 2 with the not broken seals but they still dont seem to work that well....i feel like im not bleeding them right or something ....not sure ....