Tweet
I am replacing a bunch of pallet racking in one of my warehouses and the old stuff has to go. The uprights are 18ft tall, 4ft wide and the beams are 9ft. I cut a set of uprights down to 8ft and put a set in my mancave. Pair of beams are rated at 3500lbs. I have the steel wire decking to go with it. This stuff is tough (I can walk on it) and will hold a ton (no pun) of stuff. So if any of ya are close to Austin, I can turn you on to a set. Its FREE. I hate to see this stuff go to the scrap yard. PM me if you are interested. I can cut the uprights down to make it fit in your truck if needed. Its ugly stuff but a rattle can paint job would make it look good as new.
-
When a 10 isn't enough, get a 11. 80g Hardbagger -
Yeah, that racking is cool. I scored about 30 lineal feet of it ten years or so ago and you couldn't ask for more heavy-duty shelving. At one time I had four complete V8 motors on one shelf.
Takes a lot of room though....Fast, Cheap, Reliable... Pick any two
'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...
Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...
Comment