Announcement

Collapse
No announcement yet.

1/2" Rubber carb boot nipples

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1/2" Rubber carb boot nipples

    Hi guys I went over to san jose road riders saturday and picked up a 3 pack. It was $2.99 for three. I don't know how much the real ones go for, but these are about a 1/2" long and they fit right in I have a spare or i can pick some up for you guys if ya want. I have no idea how they will hold up over time. The original ones that i have are hard and cracked all over
    1978 XS1100E Standard
    Kerker Exhaust
    Tkat Fork Brace

    On Hold
    TopCat S.O.F.A. + Fuse Block
    Mike's XS Pod FIlters

  • #2
    Originally posted by Korr View Post
    Hi guys I went over to san jose road riders saturday and picked up a 3 pack. It was $2.99 for three. I don't know how much the real ones go for, but these are about a 1/2" long and they fit right in I have a spare or i can pick some up for you guys if ya want. I have no idea how they will hold up over time. The original ones that i have are hard and cracked all over
    Sorry, but What???
    Have no idea what you're referring to.
    Do you mean the boots to the engine? Lots longer than 1/2. Or the little
    vacuum plugs for the sync connections?
    If it's plugs, you can get them at any auto parts store.
    John
    Now: '78 XS1100E 750 FD Mod (Big Dog)
    '81 CB900C ( 10 Speed)
    '78 CB750F ( The F)
    '76 CB400F ( The Elf)
    New '82 Honda MB5 Ring Ding
    Then: '76 CB550K
    '78 CB750F
    '84 VF1100S
    And still Looking!

    Comment


    • #3
      Originally posted by jjwaller View Post
      If it's plugs, you can get them at any auto parts store.
      Oh, did not know that Gonna go check it out.
      1978 XS1100E Standard
      Kerker Exhaust
      Tkat Fork Brace

      On Hold
      TopCat S.O.F.A. + Fuse Block
      Mike's XS Pod FIlters

      Comment


      • #4
        SOME of the "auto store" caps WILL seal, but they tend to be too short. The motorcycle style will probably work better, IMHO.
        Ray Matteis
        KE6NHG
        XS1100 E '78 (winter project)
        XS1100 SF Bob Jones worked on it!

        Comment

        Working...
        X