If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I run the Yamaha factory style bags on both my XS's with custom made brackets. 6 bolts (3 per bag) and they're off in under 5 min. The lids have been modified with a hinge in place of the front latch, so no need to worry about them flying off.
I just put a set of krausers on my midnight special. I have a large windshield on it but did not really want a full fairing or trunk. The Krausers are huge and provide lots of storage that I needed to have to haul around my tools and laptop for work. My laptop will not fit in the Vetter bags or trunk on my XJ. Luggage rack comes in handy at times as well. Easily removable and look ok. The primary reason that I installed them was after the first ride on this bike SWMBO requested a backrest. I guess she felt she was going to slide off. The Krauser system comes with an adjustable backrest that can be used for rider or passenger.
I love the vetter fairing, but always thought that, while very practical, the bags were a bit oddly shaped. I really like the looks of the yamaha bags, but they don't seem to hold much, and can't be easily removed. For my current set up, I picked up a set of old krauser bags with the frames on ebay for next to nothing. They are key removable, don't look half bad, and they hold quite a bit. I don't think that they ever made a mount system for the XS, but, if you have the frames that the bags clip into, it is pretty easy to rig up mounts.
i had the vetter box on my bike with the shoei hard bags. when i went to the key west rally the bracket for the box broke. so i had to change things. got rid of the king and qeen seat, went to the standard seat, the box and hard bags. i found on e-bay a samsonite set from a 79 xs nobody bid on it. got a good deal off e-bay sale. i wanted to change the look of my bike. pic on east ralley. l liked that the bags are removable. so now i am looking for a small box for the back for rain gear and small stuff. same bags on bob jones book cover. the all vetter set up is good lots of room, but the box does not come off. there is a few choices.
I appreciate the votes guys, but for those of you voting for "other" (or any of them, really), an explaination would really help. It would be nice to know what your preferences are and WHY.
I think that if your looking for something that looks like it goes together, it's an all or nothing deal. The Vetter stuff just goes together, and does so well. I don't know about customizing, but you can certainly repaint it, and it's not too hard. I also have it on good authority (from Craig Vetter himself) that they will have repro pinstriping and such for the bags and trunks soon. I'm looking forward to this since I have repainted my bags already and will be repainting my trunk as well. Once that's been done, putting the striping and such on will be much easier using a kit than having it done by hand.
That said, my vote is for a full vetter set, they look especially good IMO in black and gold.
I am slowly going to attempt to turn my MNS into a full touring package. I have achieved the Vetter Windjammer fairing with cyclesounds, and now I'm looking at the rear end.
I've seen lots of mis-matched packages with vetter trunks and pacifico bags, or even the full Shoie set that's on ebay right now. What I'm trying to determine is what brand of luggage should I be looking for as far as quality, usability and customizability (I want to be able to make it a black and gold setup eventually). For those of you with experience with these sets, which way should I go?
Leave a comment: