Tweet
replacing frontfork seals and wipers
I have looked through all the forums on replacing front fork seals and wipers.I thought I saw somthing about a special tool or somthing.I want to do them tonight so if anybody has input or can direct me in the right area that would be great. working on a xs11f.
-
-
Possible solutions
Hey Mighty,
Here are a few links that may help you:
http://www.xs11.com/forum/showthread...ight=Fork+tool
http://www.xs11.com/forum/showthread...ight=Fork+tool
And here's how to make the TOOL!!
http://www.xs11.com/forum/showthread...=&threadid=165
Good luck.1980G Standard, Restored
Kerker 4 - 1
850 Rear End Mod
2-21 Flashing LED Arrays on either side of license plate for Brake Light Assist, 1100 Lumen Cree Aux Lights,
Progressive springs, Showa rear shocks
Automatic CCT
1980GH Special, Restored
Stock Exhaust, New Handlebars, 1" Spacer in Fork Springs, Automatic CCT, Showa Rear Shocks
'82 XJ1100 (Sold)
Automatic CCT, RC Engineering 4 X 1 Exhaust, K&N Pods, #50 Pilot Jets, YICS Eliminator. Sorely missed. -
Also if you're working on a special you don't need the tool, specials have no sockets that will fit in. They're really not difficult, I did new seals and progressive springs in maybe 45 minutes. The hardest part for me was getting the old seals out, but all I had was a screwdriver.1980 XS11SG
Dunlop elite 3's, progressive fork springs, tkat brace
Stock motor, airbox, carbs, exhaust
ratted out, mean, and nastyComment
Comment