Tweet
Hi all,
Found an excellent DIY carb sync tool HERE
This is better than the tube on a vertical board I've seen posted because it allows for a suction buffer and has the ability to be adjusted to account for changes in hose diameter etc.
The cost of the project is as follows.
All was purchased at LOWES.
4'- 2" PVC pipe (I had a stretch laying around)(Free)
1- 3/8" clear vinyl tubing (25 foot roll) ($3.80)
1- 1 gal bar/chain oil (6.49)
1- yard stick (2.98)
1- roll 1/8" poly tubing 25' roll (1.70)
4- 2" pvc caps (3.48)
2- 1/4" threaded x1/8 tube" needle valve (8.52)
2- 1/4" threaded x 3/8 tube" connector (4.24)
TTL cost ($31.21)
now that I got the parts I just need to put em together.
let you know how it goes.
Yet another model
Found an excellent DIY carb sync tool HERE
This is better than the tube on a vertical board I've seen posted because it allows for a suction buffer and has the ability to be adjusted to account for changes in hose diameter etc.
The cost of the project is as follows.
All was purchased at LOWES.
4'- 2" PVC pipe (I had a stretch laying around)(Free)
1- 3/8" clear vinyl tubing (25 foot roll) ($3.80)
1- 1 gal bar/chain oil (6.49)
1- yard stick (2.98)
1- roll 1/8" poly tubing 25' roll (1.70)
4- 2" pvc caps (3.48)
2- 1/4" threaded x1/8 tube" needle valve (8.52)
2- 1/4" threaded x 3/8 tube" connector (4.24)
TTL cost ($31.21)
now that I got the parts I just need to put em together.
let you know how it goes.
Yet another model
Comment