Announcement

Collapse
No announcement yet.

Thanks for all the help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thanks for all the help

    I just wanted to say thanks to all the ppl that helped out on my problem with the gas and oil leaks. I Changed the oil put a new filter cleaned the bike up real good from all the leaking. I got all this done and it's not leaking from the carbs at all. I found one air line off the 2nd carb. Put that back on I also tuned it up. New plugs is all. OMFG this bike is a monster. I didn't think that it would be as fast as it is. 0 to 50 in like blink? lol Now If I can just keep my brother from bugging me to sell it to him I'll be alright.

  • #2
    James, if you haven't done a full vacuum sync and pilot screw adjustment, and tweaked the float levels for optimum supply in the float bowls, YOU AIN'T SEEN NOTHING YET!!
    Ken Talbot

    Comment


    • #3
      Ken isn't exagerating. I did the same thing. Was amazed at the power... and then re-amazed after the sync.
      '81 XS1100 SH

      Melted to the ground during The Valley Fire

      Sep. 12th 2015

      RIP

      Comment

      Working...
      X