Announcement

Collapse
No announcement yet.

signals don't flash

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • signals don't flash

    Help, signals burn but do not flash ????? checked and replaced the flasher,same thing. there is another tin thing with six wires pluged into it behind the regular flasher, could that be it????


    thanks for the help....

  • #2
    We need to know what bike you have, year and model. Some of the later bikes have TWO flashers, one for the 4 way, one for the turn signals.
    Ray
    Ray Matteis
    KE6NHG
    XS1100 E '78 (winter project)
    XS1100 SF Bob Jones worked on it!

    Comment


    • #3
      Chances are, no matter what model, you need to do some cleaning of bulb & switch contacts and ground leads. Especially the ground leads at the tail signals.

      Comment


      • #4
        sorry I have 81 SX 1100 Midnight special

        Comment


        • #5
          SIGS DON'T FLASH

          PULL THE SWITCH I SENT YOU AND CLEAN THE CONTACTS IN IT.
          IF THE PROBLEM WASN'T THERE BEFORE YOU CHANGED IT , THEN I WOULD START THERE.





          BOYZSBLUE (LEON )
          BOYZSBLUE [ LEON ]

          1980-XS1100SG

          BOYZSBLUE@HOTMAIL.COM

          Comment


          • #6
            found it, it was just a loose ground thanks for your help....

            Comment

            Working...
            X