Announcement

Collapse
No announcement yet.

Left over bike parts. Located NNJ

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by MaximPhil View Post
    I agree Prisoner6 however the topic was "matching set" which is what I was responding to. The three parts shown need to be matched in order to use a single key however any side cover lock will work with that key IMHO.
    Phil
    Originally posted by dbeardslee View Post
    I just went out in the mancave where I have an F and a G parked. My key won't open my brother's side cover, and his won't open mine. Even though they don't go all the way in it does appear that those side cover locks are in fact keyed to the ignition key.
    Hi, Phil ...

    I agree that the 3 locks shown need to be matched to use a single key ...

    Based on the OP's comments, all 3 locks (and the 2 keys) apparently came, unmolested, from the same bike ... (so far, so good)

    The addition of the side cover lock from the same bike would make a "complete kit", as Mike said.

    And if Doug is correct, then whoever bought the "complete kit" would be golden, since both keys would work in all 4 locks.
    Marco

    Current bikes:
    1979 Yamaha XS Eleven Special (SF)
    1979 Honda CBX
    2002 Kawasaki ZRX1200R

    Rest in Peace, Don Glardon (DGXSER) 1966-2014
    WE MISS YOU, DON

    Comment


    • #17
      Originally posted by Prisoner6 View Post
      Hi, Phil ...

      I agree that the 3 locks shown need to be matched to use a single key ...

      Based on the OP's comments, all 3 locks (and the 2 keys) apparently came, unmolested, from the same bike ... (so far, so good)

      The addition of the side cover lock from the same bike would make a "complete kit", as Mike said.

      And if Doug is correct, then whoever bought the "complete kit" would be golden, since both keys would work in all 4 locks.
      Doug's test certainly sounds conclusive that the sidecover lock is keyed to the specific ignition key.
      Phil
      1981 XS1100 H Venturer ( Addie)
      1983 XJ 650 Maxim
      2004 Kawasaki Concours. ( Black Bear)

      Comment


      • #18
        Still have the ignition coils for sale? If you do shoot me a pm.
        81 H

        Comment


        • #19
          Originally posted by Chicagoxs View Post
          Still have the ignition coils for sale? If you do shoot me a pm.
          Hi and nope, they were sold to another forum member. I will update the list on the first post so there is no confusion.

          EDIT: turns out I can't edit that post after all. So with that heres an updated list:

          Grab bar
          Tail light
          Swingarm
          Swingarm axle
          rear drive gear assembly (NO HUB)
          rear wheel axle
          Ujoint
          Air box
          Ignition + tank cap + helmet lock with 2 matching keys
          Coils (SOLD)
          Regulator (SOLD)
          Last edited by thegenrlftw; 11-05-2015, 11:45 PM. Reason: changes
          XS11

          Comment


          • #20
            Looking to move these out in one week. Please let me know if you'd like any of these parts before they get hauled to the mini motorcycle grave yard in the woods out back. I'm not looking for much money at all.
            XS11

            Comment

            Working...
            X