Announcement

Collapse
No announcement yet.

New wheel bearing kit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New wheel bearing kit

    Hey everyone , it's been a while now since I sold my xs1100 but I was digging through my desk and finally found that brand new wheel bearing kit that I bought and lost back when I had the bike . They had fallen over the back of the drawer and had been contently sitting under the drawer for a little over a year now until I found them . But I have no use for them anymore so I figured since I'm short on money , I'd throw them up here where someone might get a little more use out of them then I will (though they do make a fine paperweight) . If I remember right I paid $35 for them but I'll sell them to whoever needs them for $20 plus whatever shipping is . These are nice sealed bearings , I have 2 for the front wheel , and one for the non shaft side of the rear . If you're interested just let me know .




    ps. I also have a set of new in the oem wrapper yamaha fork seals that fit most of the popular 70's and 80's 2 stroke bikes like the dt250 and rd350 that I'd let go of for $10 plus shipping.

  • #2
    in case anyone is interested the fork seals fit these bikes

    34mm x 46mm x 10.5mm

    # 1973 Kawasaki F11 250
    # 1974 Kawasaki F11 250
    # 1975 Kawasaki F11 250
    # 1973 Kawasaki F12-MX 450
    # 1970 Kawasaki F5 350 Bighorn
    # 1971 Kawasaki F5 350 Bighorn
    # 1971 Kawasaki F81M 250
    # 1971 Kawasaki F8 250 Enduro
    # 1972 Kawasaki F8 250 Enduro
    # 1972 Kawasaki F9 350
    # 1973 Kawasaki F9 350
    # 1974 Kawasaki F9 350
    # 1975 Kawasaki F9 350
    # 1969 Kawasaki H1 500 Mach III
    # 1970 Kawasaki H1 500 Mach III
    # 1971 Kawasaki H1 500 Mach III
    # 1976 Kawasaki KH400A
    # 1977 Kawasaki KH400A
    # 1978 Kawasaki KH400A
    # 1975 Kawasaki KT250
    # 1976 Kawasaki KT250
    # 1974 Kawasaki KX450
    # 1974 Kawasaki S3 Mach II
    # 1975 Kawasaki S3 Mach II
    # 1972 Suzuki TM250 Champion
    # 1973 Suzuki TM250 Champion
    # 1972 Suzuki TM400 Cyclone
    # 1973 Suzuki TS250
    # 1974 Suzuki TS250
    # 1975 Suzuki TS250
    # 1976 Suzuki TS250
    # 1972 Suzuki TS400 Apache
    # 1973 Suzuki TS400 Apache
    # 1974 Suzuki TS400 Apache
    # 1975 Suzuki TS400 Apache
    # 1976 Suzuki TS400 Apache
    # 1977 Suzuki TS400 Apache
    # 1971 Yamaha DS7
    # 1970 Yamaha DT1C-MX
    # 1968 Yamaha DT1 Enduro 250
    # 1969 Yamaha DT1 Enduro 250
    # 1970 Yamaha DT1 Enduro 250
    # 1971 Yamaha DT1 Enduro 250
    # 1971 Yamaha DT1MX
    # 1969 Yamaha DT1S
    # 1974 Yamaha DT250
    # 1975 Yamaha DT250
    # 1976 Yamaha DT250
    # 1977 Yamaha DT250
    # 1978 Yamaha DT250
    # 1979 Yamaha DT250
    # 1972 Yamaha DT2MX
    # 1974 Yamaha DT360
    # 1975 Yamaha DT400
    # 1976 Yamaha DT400
    # 1977 Yamaha DT400
    # 1978 Yamaha DT400
    # 1973 Yamaha MX250
    # 1974 Yamaha MX250
    # 1975 Yamaha MX250
    # 1973 Yamaha MX360
    # 1974 Yamaha MX360
    # 1975 Yamaha MX400
    # 1973 Yamaha RD250
    # 1974 Yamaha RD250
    # 1975 Yamaha RD250
    # 1973 Yamaha RD350
    # 1974 Yamaha RD350
    # 1975 Yamaha RD350
    # 1976 Yamaha RD400
    # 1977 Yamaha RD400
    # 1978 Yamaha RD400
    # 1970 Yamaha RT1
    # 1971 Yamaha RT1B
    # 1970 Yamaha RT1M
    # 1971 Yamaha RT1MX
    # 1972 Yamaha RT2
    # 1972 Yamaha RT2MX
    # 1973 Yamaha RT3
    # 1973 Yamaha SC500
    # 1974 Yamaha SC500
    # 1973 Yamaha TX500
    # 1974 Yamaha TX500
    # 1973 Yamaha TX650
    # 1974 Yamaha TX650
    # 1974 Yamaha TY250
    # 1976 Yamaha TY250
    # 1977 Yamaha TY250
    # 1975 Yamaha XS500
    # 1975 Yamaha XS650
    # 1976 Yamaha XS650
    # 1976 Yamaha YZ100
    # 1977 Yamaha YZ100
    # 1974 Yamaha YZ250
    # 1975 Yamaha YZ250
    # 1974 Yamaha YZ360
    # 1975 Yamaha YZ360

    Comment


    • #3
      ok ....how about $20 shipped on the bearings ?

      Comment


      • #4
        Bearings

        I'm interested if they'll fit my '80 G
        What are the numbers.

        Thanxs, John
        1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors )
        1979 XS1100SF (stock-euro mods planned)
        1984 XV700L Virago (to be hot-modded)
        1983 XJ750MK Midnight Maxim (semi-restored DD)
        1977 XS650D ( patiently awaiting resto)

        Sometimes it takes a whole tank of gas before you can think straight.

        Comment


        • #5
          I bought them for my 80sg special , all the places I see the bearings for sale it always lists 78-81 , so I assume they're the same for specials and standards . I'm 100% sure these fit specials though as I bought them for mine . I don't have any part numbers for them , I bought them over a year ago and they're not in the original box anymore .

          Front Right/Left Bearing Fits Yamaha TX500 1973-75 XS500 1976-78 XV535 1987-99 XS650 1977-83 XV650 1998-07 XVS650 1998-07 TX750 1973-74 XS750 1977-79 TDM850 1980-81 XJ1100 1982 XS1100 1978-81 VMX12 1985-07 XVZ12 1983-85 XVZ13 1986-93


          Fits the following Rear Right Yamaha TX500 1973-75 TX650/XS1/XS1B/XS2 1970-76 XS650D/E/F/2F/SE/SF 1977-79 XS650G/SG/H/SH/SJ/SK 1980-82 TX750 1973-74 XS750 1977-79 XS850 1980-81 XV920RH/RJ 1981-82 FZR1000 1989-93 FJ1100 1984-85 XJ1100 1982-XS1100 1978-81 FJ1200 1986-93 VMX 1985-04 XVZ12 1983-85 XVZ13D/S/U 1986-93 XVZ13A/L/T 1996-01
          Last edited by TDodge7; 04-02-2011, 03:32 PM.

          Comment


          • #6
            oh wait , I see the numbers on the bearings


            rear right : 6304-RS C3

            Fronts : 6303-2RS

            Comment


            • #7
              Allow the years, standard and specials, used the same wheel bearings even the XJ.
              Nathan
              KD9ARL

              μολὼν λαβέ

              1978 XS1100E
              K&N Filter
              #45 pilot Jet, #137.5 Main Jet
              OEM Exhaust
              ATK Fork Brace
              LED Dash lights
              Ammeter, Oil Pressure, Oil Temp, and Volt Meters

              Green Monster Coils
              SS Brake Lines
              Vision 550 Auto Tensioner

              In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

              Theodore Roosevelt

              Comment


              • #8
                I'll take 'em...

                Originally posted by TDodge7 View Post
                ok ....how about $20 shipped on the bearings ?
                PM has been sent
                1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors )
                1979 XS1100SF (stock-euro mods planned)
                1984 XV700L Virago (to be hot-modded)
                1983 XJ750MK Midnight Maxim (semi-restored DD)
                1977 XS650D ( patiently awaiting resto)

                Sometimes it takes a whole tank of gas before you can think straight.

                Comment


                • #9
                  I'll take second dibs if he backs out...
                  '79 XS11 F
                  Stock except K&N

                  '79 XS11 SF
                  Stock, no title.

                  '84 Chevy K-10 "Big Blue"
                  GM 350, Muncie SM465, NP208, GM 10 Bolt with 3.42gears turnin 31x10.5 Baja Claws

                  "What they do have is an implacable, unrelenting presence and movement that bespeaks massive power lurking behind paint and chrome. They don't wail like a screeching ninja, the don't rumble like a harley. They just growl like a spactic, stressed out badger waiting to rip your face off and eat your soul." Trainzz~RIP~

                  Comment


                  • #10
                    The bearings have sold to Schming , fork seals are still available if any of you have any 2 strokes in the garage .

                    Comment


                    • #11
                      Got 'em...

                      ...in the mail today Thanxs, Tim
                      1980 XS1100G "Dolly G" Full Dresser (with a coat of many colors )
                      1979 XS1100SF (stock-euro mods planned)
                      1984 XV700L Virago (to be hot-modded)
                      1983 XJ750MK Midnight Maxim (semi-restored DD)
                      1977 XS650D ( patiently awaiting resto)

                      Sometimes it takes a whole tank of gas before you can think straight.

                      Comment


                      • #12
                        glad they'll get some use with you , they were just going to keep sitting on the shelf here .

                        Comment

                        Working...
                        X