Parting out 81H

[cokeman]

I decided to part out the 81H. Some of what I have is as follows:

bank of carbs. I cleaned them but still need needles and seats,1 pilot screw,1 of the diaphrams has a pin hole in it.

Seat with grab rail, rear cowl is broken, seat has small tear.

Dark blue and cream tank, a few scratches,clean inside petcocks included. I had keys made for the tank and ignition, will include ignition switch also if you want it

Guage cluster. 240kmh/160mphLooks great shows 44000kms

2 sets of stock pipes. I has been welded on the collector, right side. The other set has had the baffles removed from the end. Too bad too cause other than that they look good

tci and pickup for 81

front and rear fenders, rear fender includes tail light

Also have a complete 78 engine unknown milage. Various internal parts off the 81 including clutch basket,starter,tranny gears,side covers,middle drive,drive shaft including U joint,head,valve cover(black). Motor had a bent rod and destroyed piston, other than that the internals look good, only had 44000km when cratered.

I dark blue left hand side cover, locking tab intact, gold trim on the emblem is peeling.

rear shocks,front forks(no rust need seals), front and rear calipers, and a bunch of other stuff to numerous to mention.

If anyody is interested just send a PM. I can send pics to anybody interested. All parts are plus shipping.

Thanks
Darrell

[cokeman]

Some pics of the 81

[TONIO]

carns

cokeman how much for the carbs

[Ken Talbot]

Ooooohhhh, you're killing me, man, especially as Lethbridge is just a "hop in the truck and drive over and get it" situation for me. Please don't post a reply with a "everything you see, as is, where is" price...

[cokeman]

Ken PM sent.

[kjohnson]

how much for the speedo and front master cylinder?

[cokeman]

Kjohnson PM sent

Darrell

[cokeman]

I am thinking I have scared some people away with pricing. So to clear up any confusion if there is something you need off the bike or if there is any interest in the 78 engine PM with offer. Lots of good parts here I just have NO idea what anything is worth. I have been going off the price people are getting off EBAY but maybe thas is too much. Anyway. All offers will be entertained. Or if someone is close and can pick up we can make a package deal on everything. Almost everything is off the bike or can be shortly. I can email pics if interested.

just a few examples are:
good front calipers, slotted rotors,oil cooler(complete set up), cleaned rack of carbs(need 1 pilot screw,needles and seats, I have the old ones but I think they should be changed and 1 diaphram has a pinhole), really nice tank with no rust inside,front and rear fenders,guages in really nice shape,front forks,both wheels, rear shocks,TCI and pickup coils,ignition coils,all engine parts except the crank,cylinders, head has some damage to the #1 combustion chamber but still has the cams attatched, motor had 44000kms when cratered, all gears look good. handlebars and controls except clutch lever,swing arm covers,starter, oil pump, 2 complete exhaust systems, 1 has been welded at the collector for the right hand muffler, the other has a dent in the muffler right side and have had the end baffles removed. Both have some rust but are still usable and neither has any holes.

Darrell

[cokeman]

TONIO: I tried to PM you but your inbox is full. Anyway, Make me an offer on the carbs. I also have a set of 78 carbs that I am going to use for parts. They have one broken float post and 1 screw in the stay is broken. Let me know what you need.

Darrell

[Crazcnuk]

Got anything left?

Wish I had seen this ad earlier!

[cokeman]

Crazcnuk:

I have quite a bit of the stuff left. So far I have sold the clutch basket, oil cooler, guages,front master cylinder. May have the carbs sold, not sure on that yet. What do you need. I do have good front calipers and all 3 slotted rotors in good shape, tank, 2 stock exhaust systems( nothing special but still functional) front forks, wheels,TCI and pickup for 81, transmssion, 1 left hand side cover locking tab intact!.

Darrell

[Crazcnuk]

Well, mostly I was interested in the oil cooler, and front master cylinder.

The rotors look interesting, How's the gas tank?

That left side cover will it fit on an 80?

DO you have teh rear shocks?

[cokeman]

Crazcnuk: PM sent