Announcement

Collapse
No announcement yet.

Clutch throw-out arm needed

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Clutch throw-out arm needed

    I need the arm/lever that the clutch cable attaches to at the engine. I managed to bend mine, and it now has 2 hairline cracks. It still works, but I don't want it to fail on me as I'm going down the road. Anyone have and extra one laying around?
    1980 XS850SG - Sold
    1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
    Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
    Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).

    Whether you think you can, or you think you cannot - You're right.
    -H. Ford
    Tags: None
  • #2
    I may have that. I will check when I get home tonight from work. If I have it no cost to you if you come get it.
    Ty

    78 XS1100E - Now in Minnesota
    80 XS1100LG - The Punisher
    82 XJ1100 - Current project - The Twins
    82 XJ1100 - Wife's Bike - The Twins
    82 XJ1100 - Daughter's Bike
    72 Suzuki TS125 - Daughter's Bike
    72 Yamaha Mini JT2 - Youngest Daughter's bike (She wants a bigger one now)

    Comment

    • #3
      Cool! Thanks! I would definitely ride over to pick it up - so long as this rain let up for a bit...
      1980 XS850SG - Sold
      1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
      Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
      Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).

      Whether you think you can, or you think you cannot - You're right.
      -H. Ford

      Comment

      • #4
        I break one every year. My stock has ran dry.
        1979 XS1100F
        2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.

        Comment

        • #5
          I have several if needed just let me know. Be probably 10 days in the mail though.
          2-79 XS1100 SF
          2-78 XS1100 E Best bike Ever
          80 XS 1100 SG Big bore kit but not fully running yet.
          Couple of more parts bikes of which 2 more will live!

          Comment

          • #6
            Originally posted by IanDMacDonald View Post
            I break one every year. My stock has ran dry.
            Never broken one since I got my 11 in 09. Or on any other 11 I've had since.

            Properly installed and attention to seating when doing adjustment is key.
            Greg

            Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid.”

            ― Albert Einstein

            80 SG Ol' Okie;79 engine & carbs w/pods, 45 pilots, 140 mains, Custom Mac 4 into 2 exhaust, ACCT,XS850 final drive,110/90/19 front tire,TKat fork brace, XS750 140 MPH speedometer, Vetter IV fairing, aftermarket hard bags and trunk, LG high back seat, XJ rear shocks.

            The list changes.

            Comment

            • #7
              I looked through my stash and was not able to find one. Sorry , hopefully someone else will be able to help you.
              Ty

              78 XS1100E - Now in Minnesota
              80 XS1100LG - The Punisher
              82 XJ1100 - Current project - The Twins
              82 XJ1100 - Wife's Bike - The Twins
              82 XJ1100 - Daughter's Bike
              72 Suzuki TS125 - Daughter's Bike
              72 Yamaha Mini JT2 - Youngest Daughter's bike (She wants a bigger one now)

              Comment

              • #8
                Cbug, check your PM's

                CZ

                Comment

                • #9
                  Originally posted by BA80 View Post
                  Never broken one since I got my 11 in 09. Or on any other 11 I've had since.

                  Properly installed and attention to seating when doing adjustment is key.
                  I imagine there is a "right" way of doing it, but I have yet to discover it. I always use a screwdriver under the arm to lift it up, prying against a small "bump" in the case. The arm tends to bend outward when doing this though. I need to create a pry tool to wrap under the arm, but pry it up in a circular fashion against the center mounting point.
                  1980 XS850SG - Sold
                  1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
                  Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
                  Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).

                  Whether you think you can, or you think you cannot - You're right.
                  -H. Ford

                  Comment

                  • #10
                    Originally posted by CaptonZap View Post
                    Cbug, check your PM's

                    CZ
                    I did, but the only message about this came from Vanimal5k. Looks like he's got me covered.
                    1980 XS850SG - Sold
                    1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
                    Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
                    Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).

                    Whether you think you can, or you think you cannot - You're right.
                    -H. Ford

                    Comment

                    • #11
                      OK, good deal.
                      My PM must have been lost somewhere.

                      CZ

                      Comment

                      • #12
                        I've tried all the methods. I still seem to break it every year, lol. Somebody mentioned having them made in a tougher metal.
                        1979 XS1100F
                        2H9 Mod, Truck-Lite LED Headlight, TECHNA-FIT S/S Brake Lines, Rear Air Shocks, TKAT Fork Brace, Dyna DC-I Coils, TC Fuse Block, Barnett HD Clutch Springs, Superbike Handlebars, V-Star 650 ACCT, NGK Irridium Plugs, OEM Exhaust. CNC-Cut 2nd Gear Dogs; Ported/Milled Head; Modded Airbox: 8x8 Wix Panel Filter; #137.5 Main Jet, Viper Yellow Paint, Michelin Pilot Activ F/R, Interstate AGM Battery, 14MM MC, Maier Fairing, Cree LED Fog Lights.

                        Comment

                        • #13
                          Originally posted by IanDMacDonald View Post
                          I've tried all the methods. I still seem to break it every year, lol. Somebody mentioned having them made in a tougher metal.
                          Maybe I'll do that. Hopefully, before my current one breaks, I can send it to my dad (an engineer with a shop) and have him fab something for me. I don't do much with metal, as I'm more of a woodworker.
                          1980 XS850SG - Sold
                          1981 XS1100LH Midnight Special (Sold) - purchased 9/29/08
                          Fully Vetterized and Dynojet Kit added, Heated Grips, Truck-Lite LED headlight, Accel Coils, Irridium plugs, TKAT Fork Brace, XS850LH Final Drive & Black SS Brake lines from Chacal.
                          Here's my web page devoted to my bike! XS/XJ User's Manuals there, and the XJ1100 Service Manual and both XS1100 Service manuals (free download!).

                          Whether you think you can, or you think you cannot - You're right.
                          -H. Ford

                          Comment

                          • #14
                            Originally posted by CatatonicBug View Post
                            I imagine there is a "right" way of doing it, but I have yet to discover it. I always use a screwdriver under the arm to lift it up, prying against a small "bump" in the case. The arm tends to bend outward when doing this though. I need to create a pry tool to wrap under the arm, but pry it up in a circular fashion against the center mounting point.
                            Medium sized crecent wrench works great on the pivot arm.
                            81H Venturer1100 "The Bentley" (on steroids) 97 Yamaha YZ250(age reducer) 92 Honda ST1100 "Twisty"(touring rocket) Age is relative to the number of seconds counted 'airing' out an 85ft. table-top.

                            Comment

                            Previous template Next
                            Working...
                            X