ignition assy w/ timing cover, front rotors, etc.

[jamak]

Need a complete ignition assy w/ timing cover for an '80 standard G. Also both front rotors, a windshield for a Vetter Windjammer. Left saddlebag of the ABS type with the lock on the inside/top of the bag. Proverbial blind old lady whacked me last week, and trying to salvage a total from the ins. co. .
I live in N. Brookfield, MA. 01535. Thanks.

[mxmikie]

i have it minus the cover

[jamak]

ignition assy. w/ timing cover, front rotors, etc.

Can you post a picture? Does it have the timing plate? Thanks.

[mxmikie]

http://community.webshots.com/album/582924941MylCDP?vhost=community

[mxmikie]

Can you post a picture? Does it have the timing plate? Thanks.

it is complete

[jamak]

ignition assy. w/ timing cover, front rotors, etc.

Thanks Mike. How much do you want? PM me on this, if you would.

[Yahman]

What type of Windjammer do you have? I have a windshield for the type 4 and one for the type 5. Yours for $5.00 plus the cost of shipping.

Larry

[jamak]

ignition assy. w/ timing cover, front rotors, etc.

Not really sure. It's off an '80 standard G. It has the square headlight & turn signals, 7 mounting screws w/ 2 clips at the top on either side. Has a Yamaha nameplate that the electrical plug-in for the lights mounts thru. I have pics I can email, if you give me an address. What kind of shape are they in, and what height? I never measured it, but I think the old one was 22"
tall. It's a great price. I only ask because mine was too tall, by a few inches; I had to look thru it a lot, unless I stretched. Thanks.

[jamak]

ignition assy. w/ timing cover, front rotors, etc.

Larry,
Looked on a website that sells new WS for Vetter's, and can't see a lot of difference between the 3,4, or 5 in shape. It asks if you have 9 mounting holes, or 7 with the 2 clips on all of them. Will be out most of today(Sat.), but if you shoot me that email, I'll send some pics. Thanks.

[Yahman]

Hi,

Sorry for the delay. They both have 7 mounting holes. The only difference is that one is 1/2" taller, slightly more curved and 1" wider at the top. That one is for the Vetter 4, if I remember correctly. You can have them both, the difference in shipping is about $4.50. USPS is about $15 to $20 and UPS is $20 to $25. The extra $5 is for the cost of a box and packing materials.

Larry

[bikerphil]

This is Jamak's fairing that he needs a windshield for...