Announcement

Collapse
No announcement yet.

oil cooler and all hardware for 78 1100 E

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • oil cooler and all hardware for 78 1100 E

    I would like to buy an oil cooler the adapter with stems that goes on top of the oil filter would be good if it is all you have or if you have every thing drop me a line and a price !! thanks ken

  • #2
    TC also makes a adapter plate for a spin on oil filter that has hook-ups for an oil cooler.
    Nathan
    KD9ARL

    μολὼν λαβέ

    1978 XS1100E
    K&N Filter
    #45 pilot Jet, #137.5 Main Jet
    OEM Exhaust
    ATK Fork Brace
    LED Dash lights
    Ammeter, Oil Pressure, Oil Temp, and Volt Meters

    Green Monster Coils
    SS Brake Lines
    Vision 550 Auto Tensioner

    In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.

    Theodore Roosevelt

    Comment


    • #3
      You might want to check the eBay sites in England and Germany. The oil cooler was standard equipment over there (unlike here, where it was a one-year-only offering) so they're a lot more common....
      Fast, Cheap, Reliable... Pick any two

      '78E original owner - resto project
      '78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
      '82 XJ rebuild project
      '80SG restified, red SOLD
      '79F parts...
      '81H more parts...

      Other current bikes:
      '93 XL1200 Anniversary Sportster 85RWHP
      '86 XL883/1200 Chopper
      '82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
      Cage: '13 Mustang GT/CS with a few 'custom' touches
      Yep, can't leave nuthin' alone...

      Comment


      • #4
        I have an oil cooler and adapter plate. PM me
        1979XS1100SF
        K&N's and drilled airbox
        Jardine 4in1
        Dunlop Elite 3's
        JBM slide diaphragms
        142.5 main jets
        45 pilot jets
        T.C.'s fusebox & SOFA
        750/850 FD mod.
        XV 920 Needle Mod.
        Mike's XS plastic floats set at 26mm
        Venture Cam Chain Tensioner

        Comment

        Working...
        X