If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I need a #3 carb body for my XS. The other three were able to be saved but #3 was not. If you have a good carb body please let me know what you would take for it shipped to 74055 (Oklahoma). Thanks!
old_chopper
US Army 1986-1991
1979 1100 Special (on the road after 16 years!)
1983 GS300L (wifes ride)
1985 Super Glide
2012 Super Glide
What was wrong with it? I may want it for an experiment.
Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters Green Monster Coils SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Trying to extract the idle mixture jet and the casting broke. I drilled it o/s and made a threaded sleeve to install the new jet in but it's just enough off center that the jet will not enter the hole below. I could probably repair but would prefer to get a solid carb for it.
US Army 1986-1991
1979 1100 Special (on the road after 16 years!)
1983 GS300L (wifes ride)
1985 Super Glide
2012 Super Glide
Hmmm I don't think that would work for my experiment.
Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters Green Monster Coils SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
I may have one available this weekend. I am in need of #2 carb due to a busted float tower. If I dont find it I am going to use 78-79 carbs and my carb bodies will b for sale st $30.00 a body.
1981 xs1100 venturer... Finally runs
Still has carb issues, but runs
For all of your Amsoil needs go to www.mrguysoil.com
Well I got my set to work so I will not be selling anything. I do know of a salvage yard where I can get you a body thats in rebuildable shape. I would charge $5.00 more than what they charge me (for my time) plus shipping. I would do the transaction with Paypal.
1981 xs1100 venturer... Finally runs
Still has carb issues, but runs
For all of your Amsoil needs go to www.mrguysoil.com
Comment