If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
the windjammer fairing wiring harness's are all the same.Just hook to different wires on the different makes of bike.
The hard part will be finding the mount. Good luck
Tom Clisham
Age is relative YOU WON"T GET OLD TIL YOU SELL THE BIKE
_____________________________________________
'78xs1100E ,all stock & original GONE TO WISCONSIN
'80 SG Vetter fairing,hard bags,trunk,fork brace,
stock headers with fishtail mufflers,black & beautiful GONE TO ARIZONA
79SF lowered,jardine 4/2 exhaust,pod filters,drilled rotors,fork brace, bar hopper
79SF 1 owner,8000 miles, restoring to completely original ( I hope) GONE TO FRANCE
There is usually several windjammer mounts on ebay for XS's
Nathan
KD9ARL
μολὼν λαβέ
1978 XS1100E K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters Green Monster Coils SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
I found a new mount with harness and all hardware from reruncycles.com. They also sell a lot of stuff on ebay, which is where I found him in the first place. $79.99+$9 shipping.
1978 XS1100E K&N Filter
#45 pilot Jet, #137.5 Main Jet
OEM Exhaust
ATK Fork Brace LED Dash lights
Ammeter, Oil Pressure, Oil Temp, and Volt Meters Green Monster Coils SS Brake Lines
Vision 550 Auto Tensioner
In any moment of decision the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Yeah, but NOS often is, which is what that guy mostly deals in. He has trunk and bag lids, unpainted NOS still in the boxes. All that kind of stuff. I guess I went around finding warehouses full of the stuff. A lot of it's pretty reasonable when you consider. I've been jonesing for a trunk lid and a pair of saddlebag lids for a while now. With those I could get a first class paint job done up on them, they even come with the original decal set, so you can get them painted and put the decals on under the clear coat just like would have been done originally.
Cy
1980 XS1100G (Brutus) w/81H Engine
Duplicolor Mirage Paint Job (Purple/Green)
Vetter Windjammer IV
Vetter hard bags & Trunk
OEM Luggage Rack
Jardine Spaghetti 4-2 exhaust system
Spade Fuse Box
Turn Signal Auto Cancel Mod
750 FD Mod
TC Spin on Oil Filter Adapter (temp removed)
XJ1100 Front Footpegs
XJ1100 Shocks
I was always taught to respect my elders, but it keeps getting harder to find one.
Comment